User manual TISSOT T-TOUCH EXPERT

[. . . ] 1 sec. or 10:10 07 T 27. 12. 07 10:10 00 T 11:32 27 11:32 00 T 11:32 27 T a) b) 27. 12. 07 Activate glass 10;10 00 T 10:10 00 T 11:32 27 T 11:32 00 T 11:32 27 T Time T or T2 display (example: T) Setting mode : forward 1 min. (hands and display) Validate setting a) The seconds restart at zero b) The seconds continue december 27 SETTING > DATE The calendar is perpetual, i. e. the number of days per month is predefined. In continuous setting, the days scroll past slowly at first, and then quicker. [. . . ] Absolute atmospheric pressure is the actual pressure D 990 at the time and place of measurement, and 995 1000 cannot be altered. Relative pressure is a 15 10 1 0 02 0 10 1005 1A * value relative to sea level, based on local absolute atmospheric pressure . Barometers and weather charts show relative pressure values. The relative pressure value depends on the climate zone set, and can be preset on the watch. The relative pressure presetting is in line with the altitude. 6 42 12 24 6 Characteristics of function Measurement range: absolute pressure: 300 hPa to 1100 hPa relative pressure: 950 hPa to 1100 hPa Accuracy: absolute pressure: ± 3 hPa relative pressure: varies with altimeter Resolution: 1 hPa Unit conversion: 1 hectoPascal [hPa] = 1 millibar [mb] 4478m m ALTIMETER The altitude is displayed on the digital screen for 10 hours continuously. After 10 hours, the altimeter mode is deactivated, and the date is displayed. 1 sec. 27. 12. 07 792M 03:18h55 27. 12. 07 Activate glass 792M 2599FT Altitude display 03:18h55 Altitude difference display 4478m m SETTING > ALTITUDE PRESETTING 2 sec. or 792M 792M 795M 795M or 795M 792M Altitude display 792M Setting mode 795M : up 1 m or 3 ft : down 1 m or 3 ft 795M Validate setting www. tissot. ch 7/13 10 141_ E N 10 T-TOUCH EXPERT * m ALTIMETER > ALTITUDE DIFFERENCE Sequentially every 2 seconds 2 sec. 2 sec. 03:18h55 03:18h55 1188A Total cumulative gain in altitude during elapsed time 18A5 Mean vertical speed of ascent (metres/minute or feet/minute) Elapsed time or stopped time 2 sec. 2 sec. 03:18h55 Altitude difference display 3192d 24d5 Mean vertical speed of descent (metres/minute or feet/minute) 2 sec. 03:18h55 Back: Elapsed time or stopped time Total cumulative loss in altitude during elapsed time 00:00h00 R 03:18h55 R 00:00h00 2 sec. rUn 00:00h00 R STOP 03:18h55 R rESET 00:00h00 Reset Altitude difference meter Start Altitude difference meter Stop Altitude difference meter 4478m m GLOSSARY > ALTIMETER We advise you to stop the altitude difference meter during rest times and then restart it, in order to obtain more accurate results. 792M R Description of function In altimeter mode, your T-TOUCH becomes a barometric altimeter, displaying the altitude relative to mean sea level. Explanations 2000m This is a barometric instrument, which calculates 1500m the altitude as a function of absolute pressure 1000m (atmospheric). As the altitude rises, pressure 500m 0m drops, and vice versa. So the altimeter measures the difference between absolute pressure (atmospheric) and relative pressure (relative to sea level) to display the altitude. Your T-TOUCH is temperature compensated, and you can adjust your geographic location (hemisphere and climate zone). The altitude displayed is therefore corrected automatically. In compass mode, the digital screen displays the angle between 12 o'clock and the minutes hand. 1 sec. 27. 12. 07 337 0 300 A 0 CAL 337 0 N 27. 12. 07 Activate glass 337 0 S 3000 A CAL User compass calibration 3370 Back to compass display Compass display Azimuth display N W S E SETTING > COMPASS > MAGNETIC DECLINATION 2 sec. or 337 0 or 337 0 6W 0 R 2E 0 R 337 0 N 337 0 S &0 R W 20 R E 3370 Validate setting Compass display Setting mode and magnetic declination display : +/- 1 degree East : +/- 1 degree West N A 45° COMPASS > AZIMUTH In compass mode, your T-TOUCH enables you to define and follow an azimuth. To do so, you need only set the azimuth value and align the watch using the arrows. The 6-12 o'clock axis will indicate the heading to take. N 300 A 0 300 0 A 300A 0 300 0 S 300o 3000 A 3000 A 3000 A 3000 A Azimuth display a) Turn the 6-12 o'clock axis left to align 12 o'clock with the azimuth b) Turn the 6-12 o'clock axis right to align 12 o'clock with the azimuth c) The 6-12 o'clock axis is aligned with the azimuth N A 45° SETTING > COMPASS > AZIMUTH 2 sec. 300 0 A 300 0 A 270 or 270 0 A 0 or A 270 0 A N 300 0 A S 3000 A 2700 A 2700 A Azimuth display Setting mode : increase azimuth by 1 degree : decrease azimuth by 1 degree Validate setting ­ Back to azimuth display www. tissot. ch 10/13 141_ E N T-TOUCH EXPERT * CAL SETTING > COMPASS > COMPASS CALIBRATION 2 sec. CAL CAL run CAL r un CAL Compass Calibration display CAL run Activate calibration mode ­ glass deactivated during calibration Turn the watch more than a complete revolution on a horizontal surface (e. g. a table) in an environment free from magnetic interference, at a rotation speed of around 30° per second. Total time: 20 seconds maximum CAL ok CAL ko 334 334 0 N 0 S a) Calibration successful ­ data stored b) Calibration failed ­ repeat calibration Back to compass display N N W S E A 45° GLOSSARY > COMPASS Azimuth N Compass In compass mode, your T-TOUCH indicates the True North Pole, factoring in magnetic declination. In azimuth mode, your T-TOUCH indicates the azimuth (heading) that you need to turn to. Azimuth explanations Heading 337 0 S Compass explanations The vertical lines (meridians) on the Earth converge at the True North Pole (Ng), indicating its direction. The hand of a conventional compass indicates the direction of the Magnetic North Pole (Nm). The angle () between these two directions Ng and Nm is known as magnetic declination. The magnetic Ng declination value depends on your location on Nm Earth. [. . . ] Conversion formulae: Measurement range: Accuracy: Resolution: T 0C = (T 0F -32) x 5/9 T 0F = T 0C x 9/5 + 32 ­5°C to +55°C / 23°F to 130°F ± 1°C / ± 1. 8°F 0. 1°C/ 0. 2°F www. tissot. ch 12/13 141_ E N T-TOUCH EXPERT * SENSOR FAULT GENERAL INFORMATION When a function is selected and the display is cleared, it is probably due to a failure of the selected function's sensor. To activate the functions on your T-TOUCH a gentle press on the push-buttons or touch on the glass is all that is required. The brightness of the digital display decreases when the hands are in motion. 5 sec. R 27. 12. 07 In fast continuous setting mode, the display moves at a faster rate (e. g. for date function: months or years instead of days) than in non-continuous or normal speed setting mode (e. g. for date: days instead of months or years). [. . . ]