User manual TNB DRIFTB

[. . . ] 9 Locating Controls and Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 About the Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Connecting a Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Using the Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You will lose all unsaved data. Customizing Your VAIO Computer > Using the Power Saving Modes n 94 N If the computer is not used for a certain period of time, it will enter Sleep mode. To modify this, you can change the Sleep mode settings. To change the Sleep mode settings 1 2 3 Right-click the power status icon on the taskbar and select Power Options. Click Change plan settings under the current power plan. Change the time to place the computer into Sleep mode and click Save Changes. Customizing Your VAIO Computer > Using the Power Saving Modes n 95 N Using Hibernate Mode In Hibernate mode, the state of the system is saved on the built-in storage device(s) and power is turned off. Even when the battery runs out of power, no data will be lost. The power indicator light is unlit in this mode. If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. To activate Hibernate mode Press the Fn+F12 keys. Alternatively, you can click Start, the arrow next to the Lock button, and Hibernate to place the computer into Hibernate mode. When your computer is in Hibernate mode, you cannot insert a disc. Hibernate mode requires more time than Sleep mode to be activated. Hibernate mode uses less power than Sleep mode. !Do not move your computer before its power indicator light turns off. Customizing Your VAIO Computer > Using the Power Saving Modes n 96 N To return to Normal mode Press the power button. The computer returns to its normal state. !The Phone and Modem Options window appears. Customizing Your VAIO Computer > Configuring Your Modem n 101 N 9 Check that your modem is listed on the Modems tab. If your modem is not listed, click Add and follow the wizard. 10 Click Apply/OK. Before applying new country settings, make sure your phone cable is disconnected from your computer. Upgrading Your VAIO Computer > n 102 N Upgrading Your VAIO Computer Your VAIO computer and memory modules use high precision components and electronic connectors technology. To avoid invalidation of the warranty during your product warranty period, we recommend that: You should contact your dealer to install a new memory module. You should not install it yourself, if you are not familiar with upgrading memory on a computer. You should not touch the connectors or open the memory module compartment cover. Contact VAIO-Link if you need assistance. The type of module and the amount of memory installed on your computer may differ depending on the model you purchased. See the specifications to find out about the configuration of your computer. Upgrading Your VAIO Computer > Adding and Removing Memory n 103 N Adding and Removing Memory If you want to expand the functionality of your computer, you can increase the amount of memory by installing optional memory modules. Before you upgrade your computer's memory, read the notes and procedures in the following pages. Notes on adding/removing memory modules Be sure to place your computer on a flat surface before adding or removing memory modules. Improper installation of memory modules may cause damage to your system. This damage may void your manufacturer's warranty. [. . . ] ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. ArcSoft WebCam Companion is a trademark of ArcSoft, Inc. ATI and ATI Catalyst are trademarks of Advanced Micro Devices, Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. [. . . ]