User manual TNB IMMERSION M10

[. . . ] This appliance complies with the statutory safety regulations. Incorrect usage can, however, lead to personal injury and property damage. Basic Safety Instructions For safe handling of the appliance observe the following safety information: ■ Before use check the appliance for visible external damage. Do not take into operation an appliance that is damaged or has been dropped. [. . . ] Be careful when working with the appliance. Always replace the protective cap on the appliance when it is not in use. There is also a risk of personal injury!For safe handling of batteries observe the following safety instructions: ■ Do not throw batteries into a fire. –  Regularly check the condition of the batteries. Leaking battery acid can cause permanent damage to the appliance. Special caution should be exercised when handling damaged or leaking batteries. If a battery should be swallowed, seek medical attention IMMEDIATLY. –  If you do not intend to use the appliance for an extended period, remove the batteries. GB Component description Protective cap / Test aid Measuring pins Display Battery compartment ON/SET button (On/Off switch / Measuring button) Button LED (LED on/off) Initial use Items supplied and transport inspection This appliance is supplied with the following components as standard: ▯ Construction materials- and wood moisture measuring appliance ▯ 4 x 1. 5 V Batteries (AAA/Micro/LR03) ▯ This operating manual PBUH 1. Lines on the display ♦ To read the result for firewood, cardboard and construction timber, use the left scale with the symbol . ™¦ To read the results for mortar, concrete and plaster, use the right scale with the symbol . ™¦ If the measured value exceeds the maximum values of 2 % resp. 44 %, the measurement lines start to blink. ™¦ To minimise measurement errors, carry out comparative measurements at several locations. Temperature Display ♦ The temperature is indicated at the top of the display ♦ Press and hold the ON/SET Celsius and Fahrenheit. Button for 3 seconds to toggle between Pocket lamp ♦ Press and hold the button ♦ Press the button for 3 seconds to switch the LED off. Once again to switch the LED Automatic switch-off The appliance switches itself off automatically after approx. 30 seconds without is button activation. The automatic switch off is disabled when the LED switched on. 100 g 0°- 40°C Wood moisture content – guidelines for firewood 6 - 15 % moisture content = Very good calorific values 16 - 20 % moisture content = Suitable for heating, but with restrictions 21 - 44 % moisture content = Not suitable for heating Further drying required Building moisture – guidelines for concrete / screed The values with a dark background are classified as wet. [. . . ] –  Check the measuring pins before every use for damage. Storage/Disposal Storage Always replace the protective cap on the appliance when it is not in use. If you do not intend to use the appliance for an extended period, remove the batteries. Store the appliance in a dry environment. [. . . ]