User manual TNB MAGIC COPY PREMIUM

[. . . ] · Children should be supervised to ensure that they do not play with the appliance. BATTERY CHARGER · Do not modify the polarized plug to fit a non-polarized outlet or extension cord. · Do not use outdoors or on wet surfaces. · Unplug the charger from the outlet when not in use and before servicing. [. . . ] · Do not use STICK vacuum cleaner in an enclosed space filled with vapours given off by oil based paint, paint thinner, moth proofing substances, flammable dust, or other explosive or toxic vapours. · Leaks from battery cells can occur under extreme usage or temperature conditions. If the liquid gets on skin, wash quickly with water. If the liquid gets into the eyes, flush them immediately with clean water for a minimum of 10 minutes. Seek medical attention. safety information _03 contents ASSEMBLING THE CLEANER 05 OPERATING THE CLEANER 05 Assembling the cleaner 07 Assembling the handle and the main body 07 Assembling the main body and the power brush 07 Assembling the main body and the handy cleaner 08 Charging 09 About the battery 10 10 10 11 11 Using the stick cleaner Using the power brush Using the handy cleaner Using the crevice / dusting Emptying the dust bin 10 MAINTAIN TOOLS AND FILTER 13 TROUBLESHOOTING 13 Cleaning the filter 14 Countermeasure to remove anything clogging the cleaner 16 04_ contents assembling the cleaner ASSEMBLING THE CLEANER Front view Handle Power button Rear view 01 ASSEMBLING The button to separate the handy cleaner Front vent Rear vent The button to separate the dustbin Dustbin The button to separate power brush power brush shutter Power brush Charging pins Charger crevice / dusting Charging terminals crevice / dusting cradle Charging lamp Handy cleaner Dustbin cover Hepa filter Power button Grill filter The button to separate the dustbin Dustbin assembling _05 assembling the cleaner Check the contents of the package. Handle Main body Handy cleaner Power brush Charger Screw Guiding key Sub items to assemble the handle and the main body User manual Crevice / Dusting 06_ assembling ASSEMBLING THE HANDLE AND THE MAIN BODY Insert the guiding parts of the handle as far as possible into the hole of the main body, insert the guide key into the holes of the handle and then fasten the screw with the (+) screw driver. 01 ASSEMBLING 1 Handle 2 Guiding parts 3 Guiding key Main body Holes on the main body Screw ASSEMBLING THE MAIN BODY AND THE POWER BRUSH Insert the connector of the power brush into the hole of the main body until it clicks into place. `Click' Power brush holder Pipe C/Brush ASSEMBLING THE MAIN BODY AND THE HANDY CLEANER Insert the air inlet of the handy cleaner into the air inlet of the main body and then push the handy cleaner into the main body until it clicks into place. `Click' The air inlet of the main body The air inlet of the handy cleaner assembling _07 assembling the cleaner CHARGING 1. Install the charger on a flat surface and then plug the power cable. 2. Turn the power buttons of the main body and the handy cleaner off. Connect the handy cleaner to the main body. (When the main body and the handy cleaner are not assembled, the stick cleaner does not work. ) 4. Install the cleaner with the charger aligning the charge pins of the cleaner with the charge terminals of the charger. Only when the handy cleaner is assembled, does the stick cleaner work. (For assemblying the handy cleaner: See page 7). When you use the stick cleaner, turn the handy cleaner power off. Power button CAUTION Countermeasure when the stick cleaner is not turned off. · Check if the handy cleaner is on. You can only turn the stick cleaner on or off when the handy cleaner power is turned off. USING THE POWER BRUSH · Since you can change the direction of the power brush by moving the handle of the stick cleaner left or right, cleaning is much easier. · When you clean the floor right in front of the wall, the front shutter is activated so that you can clean the dust easily. Normal operation When the shutter operates USING THE HANDY CLEANER 1. Lift the button to separate the handy cleaner and separate the handy cleaner from the main body by pulling it in the direction of the arrow. The button to separate the handy cleaner 10_ operating 2. Handy Cleaner On / Off · When the power button is pressed, the operation . Connect the handy cleaner to the main body after using it. When you connect the handy cleaner to the main body, make sure to turn the handy cleaner off. Power button 02 OPERATING CAUTION USING THE CREVICE / DUSTING Insert crevice/dusting into the end of the air inlet on the handy cleaner to install it. · After using it, please store it in the crevice/dusting cradle of the charger so that you do not lose it. · Crevice : Use this to clean the dust from the grooves of window frames, corners or gaps. [. . . ] · Dry the part in the shade as drying it in the sun for a long time may deform or discolor it. COUNTERMEASURE TO REMOVE ANYTHING CLOGGING THE CLEANER · · · · To prevent clogging while using the cleaner, avoid vaccuuming big or sharp objects such as toothpicks, blades, socks, etc. If the cleaner is clogged while in use, the sucking power may decrease and a vibrating sound may be heard. In this case, remove the item clogging the product. If a foreign object is caught while you use the product, the drum will not rotate. [. . . ]