User manual TNB MLDV032640

[. . . ] The kiddy guardianfix pro 2 is another innovative product in our pro range. Our special energy-absorbent materials provide the greatest possible safety in the event of a lateral impact. Your child safety car seat is also equipped with kiddy shock absorbers (F) and with the k-fix fastening system for extensive protection during frontal impact. The kiddy guardianfix pro 2 parts are indicated by a letter in brackets in this user manual and are explained at the beginning under the point with the same descriptor. [. . . ] 4+5) The innovative adjustment system of the kiddy guardianfix pro 2 provides the optimal adjustment to the size of your child by adjusting the headrests (G) and shoulder rests (H) in one movement. The correct headrest setting is achieved when the head of your child lies in the narrowest position of the headrest (G) (Fig. 2 Adjusting the head and shoulder rest ENG To adjust the head (G) and shoulder rests (H), grasp the height adjustment handle (Q) on the back of the headrest (G) and pull it out gently, while simultaneously raising or lowering the headrest (G) to the desired height (Fig. Check to see that the headrest (G) is firmly locked in place by gently pressing down on it. Your child can enjoy substantially better seating comfort by adjusting the leg extension (L). The leg extension (L) can be adjusted to 4 positions. Pull or push the leg extension (L) into the required position (Fig. 3 Adjustment of leg extension (AG II-III, 15-36kg) Never put the seat in the reclining or upright position while driving. To do that, stop your vehicle, unfasten the seat belt and take your child out of the child seat. To adjust the reclining position keep the release button (S) pressed (Fig. 11; Point 1) and at the same time pull the seat (I) away from the backrest of the vehicle (Fig. 3) and adjust the car seat if necessary as described in Section 5. ENG The correct locking will be confirmed by the "green" k-fix lock indicator (W) (Fig 19). Test whether the k-fix connectors (E) are closed by jerking on the seat (I) and check the left and right k-fix connector whether the lock indicator (W) shows "green"!If you want to use the child restraint system for the age group I in the sitting position or for children of the age groups II and III (15 – 36 kg; without impact shield) you have to push the seat (I) towards the backrest of the vehicle. keep the release button (S) pressed in (Fig. 20; Point 1) while at the same time pushing the seat (I) toward the backrest (Fig. Now you have fixed the kiddy guardianfix pro 2 in the vehicle in the (maximum) reclining position. The reclining position may only be used for the age group I (9 – 18 kg) together with the impact shield. To secure your child in the seat fixed with k-fix, please proceed as described in Section 7. Securing the child Semi-universal: If you want to use the car seat with the k-fix mounting, make sure it is secured in the vehicle as described in Section 6!Universal: If you want to use the child safety car seat without the k-fix mounting, the k-fix connectors must be retracted into the seat (I)! [. . . ] Pull out the vehicle restraint and place the lap belt under both armrests (D) of the seat (I) (Fig. Tighten the lap belt and place the diagonal belt on the side of the belt buckle under the armrests (D) (Fig. Unsnap the buttons on the rears of the shoulder rests. Now you can pull the covers off the shoulder rests (H) from the bottom to the top. [. . . ]