User manual TNB NOTEBOOK MAINS CHARGER

[. . . ] They are to be read and applied by everyone assigned to operate, and eliminate faults in, the appliance. Keep these operating instructions and hand them over with the appliance to any future owners. copyright This documentation is copyright protected. Any copying or reproduction of it, including as extracts, as well as the reproduction of images, also in an altered state, is only permitted with the written authorisation of the manufacturer. [. . . ] Allow the appliance to cool sufficiently before using it again. –º Do not use foam-forming bath additives. The appropriate bath additives for bubble baths are available from specialised dealers. –º Do not fall asleep whilst using the Foot Bubble Bath. –º Place the function switch to 0 before you connect or separate the appliance from the mains power socket. 12 16:16 Items supplied The appliance is delivered with the following components as standard: ▯ Foot Bubble Bath ▯ 3 Attachments ▯ Attachment holder ▯ Operating instructions 1) Remove all parts of the appliance and the operating instructions from the carton. 3) Clean all parts of the appliance as described in the section "Cleaning". NOTICE ► Check the contents to ensure everything is present and for signs of visible damage. –º If the delivery is not complete, or is damaged due to defective packaging or through transportation, contact the Service Hotline (see chapter Service). GB Disposal of the packaging The packaging protects the appliance from transport damage. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable. It therefore needs less water than to the "Max" marking when it is being filled, because the water level rises when you put your feet into the appliance. Otherwise the water could overflow during the foot bath. ™¦ Fill the appliance with warm or cold water. INFORMATION ► The purpose of the heating function is not to heat cold water. It should simply maintain the temperature of the water. –º You can also use special bath additives. However, please refrain from using foam-producing bath additives. –º You can also use Position ạ, infrared light water!+ massage without Switching on RISK OF ELECTRIC SHOCK ► Do not insert the plug into the mains power socket when your feet are already in the appliance. ™¦ ♦ ♦ Insert the plug into the mains power socket. But do not put your feet into the water yet! [. . . ] ™¦ ♦ ♦ ♦ ♦ Wipe the appliance on the inside and outside with a damp cloth. Take the massage rollers 3 out of the appliance. Clean the massage rollers 3, the attachments 0/q/w and the attachment holder 9 in a mild soapy solution and rinse everything well. Remove any residues of bath additives with a special plastics cleaner. [. . . ]