User manual TOMTOM RIDER EUROPE 45 M

[. . . ] When you are attaching the mount kit to your motorcycle, follow these guidelines:   If you are unsure about attaching the mount kit yourself, ask a professional to fit it for you. If you choose to attach the mount kit yourself, note that the Active Dock has a built-in fuse. This means that you don’t need to add a fuse yourself while performing the connection between the device and the motorcycle battery. Make sure that the mount kit does not interfere with any of the controls on the motorcycle. [. . . ] Important: Not all phones are supported or compatible with all features. For more information, go to tomtom. com/phones/compatibility. Using a headset We recommend using a compatible headset with your TomTom Rider to hear spoken instructions, make and receive hands-free phonecalls and hear warning sounds on your TomTom Rider. This makes riding with your TomTom Rider as safe as possible. For more information and a full list of compatible headsets, go to tomtom. com/riderheadsets. The instructions below describe how to set up a Bluetooth® headset. If you did not establish a Bluetooth connection between your Bluetooth headset and your TomTom Rider when you first turned your TomTom Rider on, you can establish the connection at any time by doing the following: 1. Turn the headset on or off by following the instructions for your particular brand of headset. Tap Connect to headset and follow the instructions to establish the connection. Make sure you position the microphone correctly. For best results, don’t position the microphone directly in front of your mouth, position it just to the side of your mouth. An image of the parts of a typical headset is shown below: 1. Charging connector Before you can use your Bluetooth headset, fully charge the headset using the charger supplied with the headset. Connecting to your phone Important: To hear voice instructions, hands-free calls or warning sounds, you need to use a compatible headset with your TomTom Rider. For more information and a full list of compatible headsets, go to tomtom. com/riderheadsets. First you must establish a connection between your mobile phone and your TomTom Rider. Tip: Do not pair your headset with your mobile phone. If you do this you will not be connected to your TomTom Rider and will not hear any navigation instructions. Tap Manage phones and select your phone when it is shown in the list. You only need to do this once and your TomTom Rider will remember your phone. Tips     Make sure that you switch on Bluetooth® on your phone. Make sure that your phone is set to 'discoverable' or 'visible to all'. You may have to enter the password '0000' on your phone in order to connect to your TomTom Rider. To avoid having to enter '0000' every time you use the phone, save your TomTom Rider as a trusted device on your phone. [. . . ] This document contains information protected by copyright. No part of this document may be photocopied or reproduced in any form without prior written consent from TomTom N. V. Model names 4GD00 96 Copyright notices © 2013 TomTom. TomTom and the "two hands" logo are registered trademarks of TomTom N. V. [. . . ]