User manual TOMTOM WIRELESS GPS

[. . . ] Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5. Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2/70 The TomTom Wireless GPS receiver Congratulations with the purchase of your TomTom Wireless GPS receiver. You now have one of the smallest and most versatile wireless GPS receivers available today. [. . . ] Operation in low (below 0ºC/32ºF) or high (over 45ºC/110ºF) temperatures will affect power supply efficiency and the ability to charge the battery. All Lithium-Ion batteries will experience power supply efficiency deterioration over time, even if not used, and have a limited life expectancy. Permanently powering the battery will reduce life expectancy. Do not continue recharging the battery if it does not recharge within the specified time. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. Do not use your product in a humid, wet and/or corrosive environment. Do not put, store or leave your product in or near a heat source; in a high temperature location; in strong direct sunlight; in a microwave oven; in a pressurized container, and do not expose it to temperatures over 60ºC (140ºF). Failure to follow these guidelines may cause the Lithium-Ion battery to leak acid; become hot; explode; or ignite and cause injury and/or damage. THE LITHIUM-ION BATTERY CONTAINED IN THE PRODUCT MUST BE RECYCLED OR DISPOSED OF PROPERLY. USE ONLY WITH SUPPLIED CHARGER(s) AND SUPPLIED AC ADAPTOR FOR BATTERY CHARGING. 2. 7 Installation, Use & Maintenance Do not attempt to service this product yourself. Do not open, puncture or disassemble the product. For permanent installation and powering in a vehicle, we recommend hiring a professional service technician. 5/70 For mobile installation, ensure that the GPS receiver has an unobstructed view of the sky, or that it is connected to an optional external antenna Protect your product from excessive heat (see previous paragraph), extreme cold (see previous paragraph), dust, liquids and direct sunlight. Do not use the product on an unstable surface. When using the product in a mobile environment always fasten the product to prevent accidental movement of it. Handle all parts, cables and connectors with care. Only use supplied and suggested accessories and power supplies. Ensure that any power supply and/or AC adapter is cooled by placing it in a ventilated area. The power supply and/or AC adapter, the cradle, and the receiver unit may become warm or hot during operation. Unplug the product from any external power source before cleaning. Only clean the product with a dry cloth. Only use the supplied PDA Power Cable with PDA's that conform to the specifications of the cable. [. . . ] The 'Charge and GPS' indicator will blink once. If the GPS receiver needs charging, the 'Charge and GPS' indicator will remain on. The Bluetooth indicator will switch off. 3. 3. 5 Setting up a connection with your PDA/Smartphone/Laptop Please refer to the Bluetooth connection setup instructions in the documentation that comes with your PDA, Smartphone or laptop. You will need to set up a Serial Port connection between the GPS receiver and your device. [. . . ]