User manual TOMY CHATBOT

[. . . ] B: this may already be supplied loose) and insert the battery pack correctly, connecting the plug with the socket. Replace the cover and screw firmly into position, referring to the Quick Start Guide for pictorial reference. Ensuring the power cable is correctly connected, plug your Parent Unit into the mains supply and charge for a full 7 hours. You can use your monitor while it is charging by following the `Set Up' guide below. [. . . ] Thereafter every time your baby's sounds rise above the threshold this feature will be interrupted instantly and normal sound and video monitoring will continue until your baby settles again. â· PAGING Locate a lost Parent Unit by pressing the button on the Baby Unit 3 times in quick succession and the Parent Unit will sound a 1-minute long alarm. to silence the alarm , press any button on the Parent Unit. Please note that the paging feature will only work when both units are switched ON and monitoring as normal. Arrow keys to go up a menu level or press and hold At any time during normal video monitoring mode you are able to take and store up to 100 photographs. Simply press the button and a freeze framed image will briefly appear on your screen before being stored within the internal memory. View and Delete To individually view images enter the `image store' sub-menu (pictured) and use the (right)arrow keys to scroll image-by-image. Images can be deleted by selecting the bin symbol Photo Scroll To use your Parent Unit as a digital photo frame, select the `Photo Scroll' sub-menu (pictured) and each stored image shall appear repeatedly and in sequence until deactivated. To exit this mode at any time, press either the up or down arrow keys. Please note that when viewing stored images, monitoring of your baby shall be suspended. â· TIMER Tomy have added a Timer so you can keep track of the interval between feeds/doses of medication or how long your child has been asleep and so on. Disconnect charger if the product will not be used for several days. To prevent a shock hazard, please disconnect from power supply before cleaning. The rechargeable battery within the Parent Unit should be recycled. Do not attempt to dismantle any part of this product. Removal and replacement of batteries should be carried out by an adult or under adult supervision. Take special care to ensure batteries are inserted correctly, observing (+) and (-) polarity marks on battery and product. Do not mix old (used) and new batteries or batteries of different types, e. Remove batteries from product after use or if storing for long periods. Only use batteries of the same or equivalent type to those recommended. Removal and recharging of rechargeable batteries should be carried out by an adult or under adult supervision. The wheelie bin symbols indicate the product and batteries must not be disposed of in the domestic waste as they contain substances which can be damaging to the environment and health. [. . . ] To limit the interference caused by other devices operating at this frequency, the Tomy Digital Video Plus TDV450 utilises Frequency Hopping Spread Spectrum technology, designed to coexist with such devices by continually searching and finding available channels within this set frequency band. To ensure the maximum number of available channels we recommend switching off any unused or unnecessary devices that may operate on this frequency. 4GHz devices as used with some Video Senders and alike are designed to flood the band width, significantly restricting the number of channels available for such digital devices. In this instance it will be necessary to switch off the analogue device to ensure unaffected monitoring. [. . . ]