User manual TOMY DIGITAL VIDEO PLUS TDV450

[. . . ] Make sure both Parent and Baby Units are plugged into the mains and/or the Parent Unit is adequately charged. The units should stand at least 1 metre apart. Press and hold the button on each unit for at least 2 seconds. The Baby Unit Camera should be positioned to give a complete view of your baby. [. . . ] To exit this mode at any time, press either the up or down arrow keys. Please note that when viewing stored images, monitoring of your baby shall be suspended. â· TIMER Tomy have added a Timer so you can keep track of the interval between feeds/doses of medication or how long your child has been asleep and so on. Within the Timer sub-menu, use the left and right arrow keys to move between ON, OFF and RESET. When active, the timer will display superimposed on the video feed and will override the date and time feature, if selected. â· SETTINGS Within the settings sub-menu you have the following options: Multi Camera Monitoring Time and Date Brightness Setting Use the (left) and (right) arrow keys to scroll between ON, OFF or SETTING. Adjust the time by selecting the SETTING sub-menu and use the up and down arrow keys to adjust the highlighted data or use the (left) and (right) arrow keys to select and adjust further data. Please note that when the time and date feature is active, subsequently activating the TIMER function will override this feature. For further details please visit our website: www. Eu Full instructions on how to connect further units are supplied with the additional units (purchased or provided). * Please note that 4 camera units can be added but only one can be viewed at any one time. â· INDEPENDENT NIGHTLIGHT As your baby grows older you can use the Nightlight without monitoring and without the need for the Parent Unit. with the Baby Unit switched OFF , press and hold the button and the Nightlight will illuminate. The button will glow red (instead of the usual green), indicating that the monitor is not switched ON. Repeat the operations described earlier for colour scroll and colour selection. This monitor is restricted for indoor use only!The Tomy Baby Monitor is designed to help you monitor your child and is not a substitute for adult supervision. Always keep electrically operated items and their cables out of reach of babies and younger children. Under no circumstances should you place any part of your monitor in or on a cot. Ensure all wiring is positioned safely so that children cannot become entangled and that no trip hazard is created. Under no circumstances should the adaptors supplied with this monitor be used with any other equipment. No other adaptors than those supplied should be used with your monitor. [. . . ] The rechargeable battery may be below the Place the Parent Unit on charge and leave for several critical voltage to activate your monitor. Check the power cable connections (including wall socket). The Nightlight is active but I cannot connect with the Parent Unit. Switch the Nightlight OFF by pressing the button then reactivate the Baby Unit's main function by pressing and holding the button. [. . . ]