User manual TOPCOM DIABLO 100 TRIPLE

[. . . ] The handset may cause an unpleasant buzzing sound in hearing aids. Do not place the basic unit in a damp room or at a distance of less than 1. 5 m away from a water source. Do not use the telephone in environments where there is a risk of explosions. Dispose of the batteries and maintain the telephone in an environment-friendly manner. [. . . ] Enter the telephone number you whish to store. Press the Memory button again to confirm. You will hear a confirmation tone and the next entry will appear. To leave the memory programming, press the on-hook button. If you wish to insert a pause, press the Redial/Pause button you want a pause of 3 sec. /P on the location where 5. 4 Calling a memory number Press the Memory button Scroll with the Up/Down keys to the entry you want to dial (0-9). The memory number will be dialled automatically. Press the Onhook button to terminate the call. 4 Topcom Diablo 100/Twin/Triple/Quattro Topcom Diablo 100/Twin/Triple/Quattro 5. 5 Direct access memory (Key 1, 2, 3 and M1) ENGLISH The product has 3 locations (Key `1', `2' and `3') where you can store a number under and dial it by pressing and holding one of these keys in standby. The phone will automatically take the line and dial the number which is stored under this key. The number stored under key `1' can also be dialed out by pressing the `M1'-key shortly in standby. 5. 5. 1 Programing the direct memory keys Press the Memory button short. Press and hold the Memory button until the -icon appears on the display. Press and hold one of the 3 direct memory keys (Key 1, 2 or 3) where you want to store the number under until `Sx - _' appears. Enter the telephone number you whish to store. Press the Memory button again to confirm. You will hear a confirmation tone and the next entry will appear. To leave the direct memory programming, press the On-hook button . 5. 6 Mute function It is possible to deactivate the microphone during a conversation. Now you can speak openly without being heard by your correspondent. Press the Mute button during a conversation. to deactivate or activate the microphone. 5. 7 Setting the volume . You can set the During a conversation you can set the volume by pressing the scroll button volume between 1-5. 5. 8 Paging When you press the Paging button on the base unit, the handset emits a ringing signal for 20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on all handsets. 5. 9 Flash button (R) When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms or 250 ms). It gives you the possibility to use the special services of your telephone provider and/or to transfer calls when you have a telephone exchange. [. . . ] If you hang up, the external line will be connected with the other handset. If you press the `#'-key you can talk with the 2nd handset and external line at the same time (conference call) ­ Or press and hold the INT key again to return to the external call. Press the On-hook button to end the call. 8. 2 Internal call (intercom) In standby press and hold the INT key until INT appears . Enter the number (1-5) of the other handset. [. . . ]