User manual TOPCOM SKYR@CER WBR 254G

[. . . ] They will not be able to hear anyone else on the channel unless the other radios have the same exact CTCSS code enabled. Press the UP ( ) or DOWN button ( ) to move to another code. Press the TALK button to confirm your selection and return to the NORMAL mode. Note: Any PMR set on the same channel can receive and listen to the conversation, also when the other use a CTCSS code. [. . . ] In VOX mode, the radio will transmit a signal when it is activated by your voice or other sound around you. VOX operation is not recommended If you plan to use your radio in a noisy or windy environment. Press the UP button ( ) to turn the VOX feature ON, or press the DOWN button ( ) to turn the VOX feature OFF. To confirm your selection and return to the NORMAL mode, press the TALK button. NOTE: To save power, the unit will not turn ON the LCD Screen light when in the VOX mode. When an active signal (one of 8 channels) is detected, CHANNEL SCAN pauses and you will hear the active signal. When an active signal (one of 8 channels) is detected, press the UP ( ) or DOWN button ( ) to bypass the current channel and continue to search for another active channel 5. The BATTERY CHARGE LEVEL is indicated by the number of squares present inside the BATTERY icon on the LCD Screen. When the BATTERY CHARGE LEVEL is low, the BATTERY icon will flash to indicate that the batteries need to be replaced or recharged. Important: Do not charge this unit using an AC/DC ADAPTER with regular "AAA" alkaline batteries installed. Only use the optional AC/DC ADAPTER with "AAA" rechargeable batteries (not included). Electromagnetic Interference/Compatibility: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Turn your unit OFF in any facilities where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Turn your unit OFF when on board an aircraft when instructed to do so. Any use of the unit must be accordance with airline regulations or crew instructions. To clean the unit, wipe with a soft cloth dampened with water. Don't use a cleaner or solvents on the unit; they can harm the case and leak inside, causing permanent damage. Battery contacts may be wiped with a dry lint-free cloth. If the unit gets wet, turn it off and remove the batteries immediately. Dry the BATTERY COMPARTMENT with a solf cloth to minimize potential water damage. Leave the cover off the BATTERY COMPARTMENT overnight or until completely dry. [. . . ] Dry the BATTERY COMPARTMENT with a solf cloth to minimize potential water damage. Leave the cover off the BATTERY COMPARTMENT overnight or until completely dry. Do not use the unit until completely dry. This equipment comes with a 24-month warranty. [. . . ]