User manual TORNADO TO4412

[. . . ] 21 Replacing the "Air Clean" filter . 21 Replacing the "Active Air Clean" filter and the "Active HEPA" filter . 23 When to change the dust compartment filter (motor protection). 24 Replacing the dust compartment filter (motor protection). [. . . ] Separate operating and maintenance instructions are supplied with these brushes. 9 Before using the vacuum cleaner Attaching the suction hose ^ Insert the elbow into the suction socket until it clicks. Use the inlet guides to direct insertion. Removing the suction hose ^ Press the release buttons at the sides of the elbow and lift the hose from the socket. 10 Before using the vacuum cleaner Connecting the handpiece and telescopic wand ^ Insert the handpiece into the telescopic wand. ^ To release the handpiece from the telescopic wand press the locking button (see arrow) and pull the handpiece away from the telescopic wand with a slight twist. Adjusting the telescopic wand This telescopic wand consists of two sections which are height-adjustable. ^ Press the adjustment button to release the tubes and adjust to the desired height. 11 Before using the vacuum cleaner Attaching the standard floor brush (depending on model) ^ Insert the wand into the floor brush and twist until it locks with a click. ^ To release the floor brush from the telescopic wand, press the locking button (see arrow) and pull the wand out of the floor brush. Observe the cleaning instructions of the floor manufacturer. Depending on the floor brush the following symbols are shown: ­ ö and ä ­ % and ) To clean carpets and area rugs: ^ Press the foot switch marked ö or %. To clean hard flooring: ^ Press the foot switch marked ä or ). Floors with very deep joints and cracks should be vacuumed using the floor brush with the bristles out. 12 Using the included accessories The following accessories are included: a Dust brush with natural bristles For cleaning moldings, decorative or carved items, etc. The head of the dusting brush can be swivelled to attain the best cleaning position. For dusting particularly delicate objects. ^ Turn the vacuum cleaner on and select the highest power setting. ^ Lift the floor brush slightly off the floor. If the marker completely fills the indicator window, the dustbag needs to be changed. How the airflow indicator works The airflow indicator is designed to show when the bag is full of common household dust and measures the amount of air flow through the dustbag. Normal household dust is a mixture of dust, hair, carpet fluff, threads, sand, etc. However, if fine dust, such as drill dust, sand, plaster or flour is vacuumed, the pores of the dustbag may become blocked. The marker will indicate that the bag is "full" even when it is not. The dustbag should be changed as the suction power is greatly reduced. If the bag is bulging with pet fur, hair, carpet fluff, etc. the indicator may not register "full". This is because the air flow of the dustbag may still be high enough not to activate the marker to show maximum. The dustbag should still be changed. 19 Maintenance and care Replacing the dustbag ^ Open the dust compartment lid and raise until it clicks into place. [. . . ] Floor brush Parquet - 3 Special brush with natural bristles intended for cleaning parquet and laminate floors, especially those susceptible to scratching. Floor brush Parquet Twister with swiveling head For cleaning all hard flooring, e. g. Especially suitable for vacuuming niches and tight spaces. Floor brush Parquet Twister XL with swiveling head For cleaning large areas of hard flooring, e. g. [. . . ]