User manual TOSHIBA 19A21

[. . . ] SPECIFICATIONS Model AC Power Input: AC Power Consumption: Picture Tube: Audio Power Output Rating: Speaker: Tuner Type: Remote Control: ENGLISH 13A21 19A21 Receiving Channels: Antenna Input Impedance: Input: Dimensions: Weight: 120V, 60Hz 54 Watts 73 Watts Type 13 (335mm diagonal) Type 19 (480mm diagonal) 1. 5 Watts 1. 0 Watts 3 inches (76mm) Full Range, 8 ohm x 1 181 Channel, Quartz PLL Frequency Synthesized Infrared, Direct Access, 2 x AAA batteries (supplied) VHF 2-13 UHF 14-69 CATV 01-97 (5A)-(A-3) 98-99 (A-2)-(A-1) 14-22 (A)-(I) 23-36 (J)-(W) 37-65 (AA)-(FFF) 66-125 (GGG)-(125) 75 Ohm (VHF/UHF) Coaxial Input Video: 1. 0 Vp-p 75 ohm Audio: 300 mV, 47k ohm Width: 14-1/4 inches (362mm) Width: 19-3/16 inches (488mm) Height: 12-5/8 inches (320. 5mm) Height: 16-3/8 inches (416mm) Depth: 14-3/16 inches (360mm) Depth: 18-5/16 inches (465mm) 20. 9 Ibs (9. 5 kg) 38. 6 Ibs (17. 5 kg) OWNER'S MANUAL COLOR TELEVISION 13A21 19A21 CAUTION Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment. ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. TV/CATV MODE SELECTION When shipped from the factory, the TV/CABLE menu option is set to the "CABLE" (Cable Television) mode. If not using CABLE, set this menu option to "TV " mode. FEATURES ACCESSORY Remote Control with two size "AAA" batteries Quartz PLL Frequency Synthesized Tuning System - Electronically locks in and memorizes available channels for perfect reception. [. . . ] Remote Sensor - Signals from the Remote Control unit are received here. POWER Button - Press to turn the TV on or off. VOLUME L/M Buttons - Press to raise or lower the level of the sound. (MENU Buttons) - Press both VOLUME L/M Buttons at the same time to display the OnScreen menu functions. (SET + / Buttons) - Press to select the desired setting during On-Screen operations. CHANNEL L/M Buttons - Press to select a higher or lower numbered channel set into memory. (ENTER Button) - Press to enter or select information for On-Screen operations. (RESET Button) - Press, while in the On-Screen menu mode, to reset the On-Screen picture adjustments to their factory preset positions. AUDIO VIDEO IN Jack - Audio and video signal cables from an external source can be connected here. SETTING LANGUAGE This TV can display the channel number, on screen displays and picture adjustments on the screen in English, Spanish or French. On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options. 1 2 3 Press the MENU button. Press the SET + or button to select the LANGUAGE mode, then press the ENTER button. Press the SET + or button until the " " indicator points to the desired language: English (ENGLISH), Spanish (ESPAOL) or French (FRANCAIS), then press the ENTER button. Press the MENU button again. MENU CH SET PICTURE LANGUAGE V-CHIP SET + / / ENTER / MENU SETTING V-CHIP This TV is fitted with a V-CHIP controller which provides you with channel viewing access controls and restrictions. This function is to prevent your children from watching violence or sexual scenes that you may choose to exclude. LANGUAGE / IDIOMA / LANGUE ENGLISH ESPAOL FRANCAIS + / / ENTER / MENU 1 2 3 4 5 6 Press the MENU button and press the SET + or button to select the V-CHIP SET option, then press the ENTER button. Enter your password (4 digits) using the Direct channel selection buttons (0-9). In the event of entering incorrect password press the RESET button. Enter the same password for confirmation, then press the ENTER button. Press the SET + or button to select the V-CHIP option. Press the ENTER button to select the ON. Press the SET + or button to select the TV RATING or MOVIE RATING option. Press the SET + or button to select the desired rating for the applicable video or TV channel. [. . . ] Press the SET + or button until the indicator next to "ADD/ DELETE" begins to flash, then press the ENTER button. Select the desired channels to be added or deleted using the Direct Channel Selection buttons (10 keys. 0-9), the CH + or button or the SET + or button. Poor color or no color TV CABLE Picture wobbles or drifts AUTO CH MEMORY ADD / DELETE + / / ENTER / MENU No CATV reception Horizontal or diagonal bars on screen No reception above channel 13 Press the ENTER button to select ADD or DELETE. ADD CH 012 If an unmemorized channel was selected (step 4), the channel indication will be red. [. . . ]