User manual TOSHIBA 20DL77

[. . . ] ENGLISH FRANÇAIS OWNER'S MANUAL LCD Color Television ESPAÑOL Owner's Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. 20DL77 © 2007 TOSHIBA CORPORATION All Rights Reserved 20DL77_En_new23. indd 1 Model number: Serial number: 20DL77 VX1A00057400 6/13/07 3:50:46 PM Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. [. . . ] When connecting a PC to the TV, use an analog RGB (15-pin) computer cable and a PC audio cable. TV lower back panel Signal names for mini D-sub 15-pin connector Pin assignment for RGB/PC terminal 5 10 15 1 6 11 Audio jack (Ø3. 5 mm) RGB PC cable Pin No. 1 2 3 4 5 6 7 8 Signal name R G B NC (not connected) NC Ground Ground Ground Pin No. 9 10 11 12 13 14 15 Signal name NC Ground NC NC H-sync V-sync NC Note: · Some PC models cannot be connected to this TV. · An adapter is not needed for computers with a DOS/V compatible mini D-sub15-pin terminal. · Depending on the DVD's title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes. Computer Conversion adapter (if necessary) Connecting the power cord Connect the supplied AC power cord to the AC IN terminal at the back of TV and then plug in the power plug to an electrical outlet with standard household power of 120V AC, 60Hz. TV back view · To use a PC, set the monitor output resolution on the PC before connecting it to the TV. The following signals can be displayed: - VGA: 640 x 480 @ 60 Hz - SVGA: 800 x 600 @ 60 Hz - XGA: 1024 x 768 @ 60 Hz However, these signal formats are converted to match the number of pixels of the LCD panel. Therefore, the TV may not display small text properly. For the best PC viewing, set PC source to SVGA @ 60 Hz format. Other formats or non-standard signals will not be displayed correctly. · To display the optimum picture, use the PC setting feature ( "Using the PC settings feature" on page 30). AC IN ~ To wall outlet 120V AC, 60Hz Power cord (supplied) NOTE: RISK OF EQUIPMENT DAMAGE!Never plug in any power cords until you have finished connecting all equipment. 19 20DL77_En_new23. indd 19 6/13/07 3:50:53 PM Chapter 3: Menu layout and navigation Menu Layout The illustrations below provide a quick overview of your TV's menu system. To display the main menus (illustrated below), press MENU on the remote control or TV control panel. Icon Picture Item Picture Settings 3D Color Management Base Color Adjustment Color Temperature Audio MTS Bass Treble Balance Surround Set Up Language TV/CABLE System Option = [Picture settings edit window] = On/Off = [Base color adjustment edit window] = Cool/Medium/Warm = Stereo/SAP/Mono = [Adjust the bass audio quality] = [Adjust the treble audio quality] = [Adjust the balance audio quality] = On/Off = English/Français/Español = [Select the input source (TV/CABLE)] = Auto/NTSC M/PAL M/PAL N [Antenna/Cable channel is selected] Auto/NTSC 3. 58/NTSC 4. 43/PAL M/PAL N/ PAL 4. 43/SECAM [Video input mode is selected] = [Start channel programming automatically] = [Add/Erase a channel] = [Picture Position Settings edit window] = [PC Settings edit window] = [Set the length of time until the TV turns Off automatically] CH Program Add/Erase Picture Position PC Settings Timer Sleep Timer Function Closed Caption Blue Screen Panel Lock = Off/C1/C2/C3/C4/T1/T2/T3/T4 = On/Off = On/Off Navigating the menu system You can use the buttons on the remote control or TV control panel to access and navigate your TV's on-screen menu system. · Press MENU to display the menu system. · When a menu is displayed, use the up/down/left/right arrow buttons (st1 2) on the remote control or TV control panel to move in the corresponding direction in the menu. · Press OK to save your menu settings or to select a highlighted item. (A highlighted menu item appears in a different color in the menu. ) · All menus close automatically if you do not make a selection within 60 seconds. · To return to the previous menu, press MENU. · To close a menu instantly, press EXIT. 20 20DL77_En_new23. indd 20 6/13/07 3:50:53 PM Chapter 4: Setting up your TV Turning the TV on Switching on the TV Connect the power cord to the TV and a wall outlet ( page 19). Selecting the menu language You can choose from three different languages (English, French and Spanish) for the on-screen display of menus and messages. 1 Press POWER on the right side of TV or on the remote control. CABLE Stereo 100 SAP 1 2 Press MENU, then press 1 or 2 to display Set Up menu. [. . . ] THIS WARRANTY DOES NOT APPLY AND SHALL BE VOID AND UNENFORCEABLE IF THE TELEVISION IS OPENED, SERVICED, OR REPAIRED BY PERSONS OTHER THAN THOSE AUTHORIZED BY TCL TO SERVICE OR REPAIR THE TELEVISION. IF THE TELEVISION FAILS TO WORK AS WARRANTED ABOVE, YOUR SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE DEFECTIVE PART. IN NO EVENT WILL TCL, TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs OR ASPs (THE "RELATED PARTIES") BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES, MONEY, REIMBURSEMENT, COSTS OR EXPENSES. THIS LIMITATION APPLIES TO DAMAGES, MONEY, REIMBURSEMENT, COSTS OR EXPENSES OF ANY KIND WHATSOEVER INCLUDING ANY DIRECT OR INDIRECT DAMAGES, DAMAGE TO PROPERTY OR PERSON, LOST PROFITS, LOST SAVINGS, INCONVENIENCE OR OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, WHETHER FOR BREACH OF WARRANTY, BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), UNDER A STATUTE OR UNDER ANY OTHER LAW OR FORM OR ACTION, OR WHETHER ARISING OUT OF THE USE OF OR INABILITY TO USE THE TELEVISION, EVEN IF ANY OF THE RELATED PARTIES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY OTHER PARTY. [. . . ]