User manual TOSHIBA 48T5435DG

[. . . ] ON-LINE MANUAL 48T543*DG LED Backlight LCD TV During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance. You can download the latest version of firmware from www. toshiba-om. net/firmware. php Some features listed in this document are limited due to local legislation and may not be available in all countries. Contents Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Air Circulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Heat Damage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press Up or Down button to select Reset and press OK button. Note: The reset function does not reset the settings for Mode, Noise Reduction, Colour Temp, Picture Zoom and HDMI True Black. English - 25 - Press “SCREEN ” button repeatedly to select between Auto(*), Full(**), 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema. Using the special functions to change the size of the displayed image (i. e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws. You can shift to screen up or down by pressing “ ”/“ ” buttons while picture zoom is selected as 14:9 Zoom, Cinema or Subtitle. (*) When Auto is selected, the aspect ratio of the screen is adjusted by the information provided by the selected source (if available). The format being displayed in Auto mode is completely independent of WSS information which could be included in the broadcast signal or the signal from an external device. Note: Auto mode will only be available in SCART, HDMI, YPbPr and DTV. (**) Full mode is only available on HD channels. Changing Picture Format English English - 26 - Configuring PC Picture Settings English Press Left or Right button to adjust the value. PC Picture Settings (*) (*) While in VGA/PC mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in VGA/ PC mode. Dot Clock Dot Clock adjustment corrects the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Press Down button until Dot Clock is highlighted. Press Left or Right button to adjust the value. PC Picture controls Contrast, Brightness and Colour adjustments in this menu are identical to adjustments defined in TV picture menu. Select Reset and press OK button to reset the adjustments. Note: For switching to VGA/PC source, press “SOURCE ” button on your remote control and select VGA/ PC input. Note that VGA/PC mode menu settings are available only while the TV is in PC source. Phase Depending on the resolution and scan frequency that you input to the TV Set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method. Press Down button until Phase is highlighted. Press Left or Right button to adjust the value. PC Position Select this to display PC position menu items. Autoposition If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically. Highlight Autoposition and then press the OK button. H Position H (Horizontal) Position shifts the image horizontally to right hand side or left hand side of the screen. Press Down button until H Position is highlighted. Press Left or Right button to adjust the value. V Position V (Vertical) Position shifts the image vertically towards the top or bottom of the screen. Press Down button until V Position is highlighted. English - 27 - You can configure sound settings of your TV by using Sound Settings menu. Configuring Sound Settings English Configuring Sound Settings Sound settings can be configured according to your personal preferences. Press MENU button and select Sound by using Left or Right button. [. . . ] Led blinks as red and green in this mode Check if CHILD LOCK is selected or not Digital Video Broadcast via an aerial / antenna Digital Video Broadcast via a cable system You can select them via Channel list You can reset the TV and perform the First Time Installation again. Ensure that no one else is aware of this procedure by securely storing the Owner’s Manual If you are asked to enter a PIN to perform the First Time Installation consult your authorized retailer Check the LAN cables if they are connected properly or not. If it is wireless connection, make sure the wireless network settings are done accordingly Try switching off the TV and then re-inserting the USB device while the TV is switched off Try restarting the recording. If you still get the same error, it is possible that your USB disk does not meet the speed requirements. [. . . ]