User manual TOSHIBA 50HP82

[. . . ] OWNER'S MANUAL Wide Plasma Display Owner's Record The model number and serial number are on the back of your display. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this display. 50HP82 TOSHIBA CORPORATION, 2002 Model number: Serial number: 50HP82 Important Information Precautions Please read this manual carefully before using your TOSHIBA plasma display and keep the manual handy for future reference. Warnings and Safety Precaution The TOSHIBA plasma display is designed and manufactured to provide long, trouble-free service. No maintenance other than cleaning is required. [. . . ] Changes the level of low frequency sound. Changes the level of high frequency sound. Changes the balance of the left and right channels. Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. SEL. ADJ. EXIT RETURN 3. Adjust the bass using the and buttons. SOUND BASS TREBLE BALANCE L R SEL. ADJ. EXIT RETURN · If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 29 Screen Settings Menu Adjusting the Position, Size, Fine Picture, Picture Adj The position of the image can be adjusted and flickering of the image can be corrected. Example: Adjusting the vertical position in the normal mode 3. Adjust using the and buttons. V­POSITION Press the PROCEED button on the remote controller to display the MAIN MENU on the screen, then. . . Use the v and w buttons to select "SCREEN, " then press the PROCEED button. Default settings (when RGB/PC is selected) SCREEN : NORMAL MODE V­POSITION H­POSITION V­HEIGHT H­WIDTH : OFF AUTO PICTURE FINE PICTURE PICTURE ADJ. SEL. EXIT RETURN · If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears. To continue making other computer image adjustments . . . Press the EXIT button to return to the main menu. To close the main menu, press the EXIT button once more. Information When "AUTO PICTURE" is "OFF" SCREEN : FULL MODE V­POSITION H­POSITION V­HEIGHT H­WIDTH : OFF AUTO PICTURE FINE PICTURE PICTURE ADJ. SEL. EXIT RETURN · The settings on the SCREEN menu are not preset at the factory. The mode switches as follows when the buttons are pressed: NORMAL FULL and · The mode can also be switched by pressing the "WIDE" button on the remote controller. Use the v and w buttons to select "V-POSITION". SCREEN : NORMAL MODE V­POSITION H­POSITION V­HEIGHT H­WIDTH : OFF AUTO PICTURE FINE PICTURE PICTURE ADJ. SEL. EXIT RETURN When Auto Picture is off, the Fine Picture and the Picture ADJ items are displayed so that you can adjust them. 30 Information Adjusting the Auto Picture ON . . . . . . . . . . . . . . . . . . . The Picture ADJ and Fine Picture adjustments are made automatically. The Picture ADJ and Fine Picture adjustments are made manually. Adjusting the position of the image V-POSITION . . . Adjusts the vertical position of the image. Adjusts the horizontal position of the image. [. . . ] Owner's Manual Read this owner's manual thoroughly before operating this plasma display. Your Responsibility THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS: (1) You must provide your bill of sale or other proof of purchase. (2) All warranty servicing of this plasma display must be made by an Authorized TCL Service Depot. (3) The warranties from TCL are effective only if the plasma display is purchased in Canada from an authorized TCL dealer and operated in Canada. [. . . ]