User manual TOSHIBA 62MX195

[. . . ] OWNER'S MANUAL Integrated High Definition DLPTM Projection Television HIGH-DEFINITION TELEVISION Compatible with Toshiba's new TM Audio/Video Hard Drive Recorder!See pages 26 and 55 for details. For an overview of steps for setting up your new TV, see page 9. Note: A high definition tuner and programming are required to view High Definition TV broadcasts. Please contact your cable or satellite provider. Note: It may take several minutes for the picture to appear on-screen if the TV is powered off and then on again quickly when the lamp unit is hot. [. . . ] To edit the options, press INFO and follow the on-screen instructions. 2. Press ENTER again to display the Confirming Your Settings screen. Highlight one of the options, press ENTER, and follow the on-screen instructions. 70 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. Chapter 7: Using the TV Guide On ScreenTM interactive program guide TV Guide On ScreenTM Services (continued) SETUP screen (continued) Change default options This option allows you to change default settings in the following categories: · General Defaults · Record Defaults · Remind Defaults General defaults Record defaults 1. From the SETUP screen, highlight CHANGE DEFAULT OPTIONS and press ENTER. Highlight RECORD DEFAULTS and press MENU to display the Record Defaults panel menu. 1. From the SETUP screen, highlight CHANGE DEFAULT OPTIONS and press ENTER. 2. Highlight GENERAL DEFAULTS and press MENU to display the General defaults panel menu. 3. Enter the required information in the panel menu fields (start time, end time, recorder choice, how long to keep a Record event, the quality of the recording). See "Record features" on page 66 for details on entering values in these fields. When finished, press ENTER to highlight DONE, and press ENTER again to close the menu and accept the changes (or highlight CANCEL to close the menu with no changes). Remind defaults 1. From the SETUP screen, highlight CHANGE DEFAULT OPTIONS and press ENTER. Highlight REMIND DEFAULTS and press MENU to display the Remind Defaults panel menu. Enter the following information in the panel menu fields: · BOX SIZE: The initial Info Box size when you open the TV Guide On ScreenTM system. Choices are No, Small (default), Large, and Last Used. · BOX CYCLE: The Info Box size rotation when you press INFO on the remote control when the TV Guide On ScreenTM system is open. Choices are No Only, Small Only, Large Only, No & Small, No & Large, Small & Large, and All (default). · AUTO GUIDE: Automatic entry into the TV Guide On ScreenTM system when the TV is powered on. Choices are On (default) and Off. Note: Set the AUTO GUIDE to Off if you do not want the TV Guide On ScreenTM system to open every time you turn on the TV. 3. Enter the required information in the panel menu fields (power On TV, auto-tune, when to display the Remind screen). See "Remind features" on page 68 for details on entering values in these fields. When finished, press ENTER to highlight DONE, and press ENTER again to close the menu and accept the changes (or highlight CANCEL to close the menu with no changes). 4. [. . . ] This product includes software written by Tim Hudson (tjh@cryptsoft. com). Copyright © 1995-1998 Eric Young (eay@cryptsoft. com). This package is an SSL implementation written by Eric Young (eay@cryptsoft. com). The implementation was written so as to conform with Netscapes SSL. [. . . ]