User manual TOSHIBA CE27H15

[. . . ] This will prevent overheating and possible damage to the television. Dusty places should also be avoided. DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND 'LIVE' PARTS. THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE. Heat Damage Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. [. . . ] Programme positions can also be selected using Pf and P. Bass, Treble and Balance The sound controls are accessible in digital and analogue modes, as are most of the televisions features. e 1 2 3 In digital mode, press MENU and using Q highlight TV setup then press OK. In analogue mode, press MENU and S or R to select SOUND. To revert to the previous programme position press ^. To display on-screen information i. e. programme position, channels or stereo/mono signal, press i+ . Press again to cancel. Stereo and Bilingual transmissions ­ analogue only Dual SOUND Dual 1 0 0 0 OK On EXIT 1/2 If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time programme positions are changed, disappearing after a few seconds. If the broadcast is not in stereo the word Mono will appear. Press Bass Treble Balance WOW Stable sound MENU OI/II to select Stereo or Mono. 4 Back Watch TV Bilingual. . . If they are transmitted the word Dual will display. Choose the required programme number and if the word Dual appears press to select Dual 1, Dual 2 or Mono. Press Q to highlight Bass, Treble or Balance and S or R to change the setting. When connecting to a Hi-fi unit, set the Speaker option to Off. Then select Fixed or Variable for the Monitor (Audio) in the AV connection menu. (See 'Input selection and AV connections' section). OI/II The Time Display ­ analogue only The time display facility allows the current (text service) time to be seen on the television screen. PLEASE NOTE: features not available in digital mode will be greyed out. To access the required menus when in analogue mode: press MENU and use S or R to select the desired menu. Picture position ­ analogue only The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs. Back light Adjusting the Back light can improve the clarity of the screen when viewing. 1 In the SET UP menu press Q until Picture position is highlighted. 1 In the PICTURE menu press Q to select Picture settings, then press OK. PICTURE SET UP Picture position Quick Setup OK OK 2/2 Picture settings 3D Colour management Base colour adjustment Cinema mode OK Off Off MENU Back EXIT Watch TV MENU Back EXIT Watch TV 2 2 3 Press OK to view the options available for the picture format that has been selected. Press P and Q to select an option, then S or R to adjust the settings. The options alter depending on the widescreen format chosen and when viewing connected equipment. In Cinema 2: Picture position Horizontal position Vertical position Reset 0 0 OK In the Picture settings menu press Q to select Back light. Press S or R to adjust. Picture settings Back light Contrast Brightness Colour Tint Sharpness MENU 3 1/2 100 100 50 50 0 0 Back EXIT Watch TV MENU Back EXIT Watch TV To return to the original factory settings select Reset in the Picture position menu and press OK. 20 Picture controls continued Picture preferences This television offers the choice of personalising the picture style. Press to view the different styles available: MPEG NR ­ Noise Reduction When watching a DVD the compression may cause some words or picture elements to become distorted or pixelated. Using the MPEG NR feature reduces this effect by smoothing out the edges. m Picture mode-1 to 3 are preset options and Picture mode-M stores your own settings: 1 Select Picture settings from the PICTURE menu. Picture settings Back light Contrast Brightness Colour Tint Sharpness MENU 1 Select MPEG NR from the Picture settings menu. Use S or R to select a setting to suit your preference. 1/2 100 100 50 50 0 0 DNR ­ Digital Noise Reduction DNR enables you to `soften' the screen representation of a weak signal to reduce the noise effect. Back EXIT Watch TV 1 2 Use S or R to adjust the Contrast, Brightness, Colour, Tint and Sharpness. Select DNR from the Picture settings menu. The differences may not always be noticeable (for the best result use lower settings as picture quality can be lost if the setting is too high). Black stretch Black Stretch increases the strength of dark areas of the picture which improves the definition. Colour temperature Colour Temperature increases the `warmth' or `coolness' of a picture by increasing the red or blue tint. 1 In the Picture settings menu press Q until Black Stretch is highlighted. Picture settings Black stretch MPEG NR DNR Colour Temperature On Off Auto. Normal 1 In the Picture settings menu press Q until Colour Temperature is highlighted. Picture settings Black stretch MPEG NR DNR Colour Temperature On Off Auto. [. . . ] EXT2 OK A VCR MENU Store Back EXIT Watch TV I A 2 With P or Q choose between Auto. , PAL, SECAM, NTSC 4. 58. C 22 +2 BBC1 Store MENU Back EXIT Watch TV Q Why doesn't the video/DVD being played show on screen? Q Why don't the controls on the television work? Check that Panel lock is not ON. Make sure the VCR or DVD player is connected to the television as shown on page 6, then select the correct input by pressing . A B A Q Q Why doesn't the remote control work? Why is there a good video picture but no sound? Check all lead connections. A Q Check the side switch on the remote control is in TV mode. Check the batteries aren't dead or inserted incorrectly. A Why is there a picture but no sound? Check the volume has not been turned down or that sound mute has not been selected. Q Why is there a message permanently on the screen? Remove it by pressing i+ . A A 35 Questions and Answers Q Why is the DTV main menu unavailable? Analogue mode is selected. Press and hold select DTV. continued Q B to Why is there no sound from my connected sound equipment? Check the Speaker option in the Sound menu is set to Off. A Q A Q Why are some of the menus locked? Lock Menu has been enabled (see 'Parental Controls' page). Why are there vertical stripes on the screen when in PC mode? A Q The Sampling clock may need adjustment. [. . . ]