User manual TOSHIBA CE32E15

[. . . ] Record these numbers in the spaces provided below. Refer to them whenever you call upon your TOSHIBA dealer regarding this product. Model Number Serial Number CE32E15 Preparation Basic Operation Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTIONS: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE PRONGS CAN BE FULLY INSERTED INTO THE OUTLET TO PREVENT ANY EXPOSURE OF THE PRONGS ON THE POLARIZED PLUG. ATTENTION: POUR PRÉVENIR LES CHOCS ÉLECTRIQUES, NE PAS UTILISER CETTE FICHE POLARISÉE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ÊTRE INSÉRÉS À FOND SANS EN LAISSER AUCUNE PARTIE À DÉCOUVERT. [. . . ] from bottom to top The selected function will be displayed in purple. CH TV CABLE VCR FAV CH TV/VIDEO A PLAY REC TV/VCR STOP SLOW PAUSE REW FF T/S buttons (on TV and on Remote) Use T or S to adjust the function you have selected with the t/s buttons. Notes: The T/S buttons will function as the VOLUME T/S buttons when no menu display is on the screen. q The s/t buttons will function as the CHANNEL s/tbuttons when no menu display is on the screen. q EXIT button (on Remote) The above four menu displays will automatically disappear from the screen if no control has been operated for about 15 seconds. If you want to clear the screen of all on-screen menu instantly, press EXIT. 11 Reference Selection EXIT EXIT Advanced Operation Basic Operation CONTRAST ­ BRIGHTNESS ­ SHARPNESS ­ COLOR ­ ­ TINT RESET + + + Preparation MENU button (on TV and on Remote) Set up Menu Function (General Instructions) Set up First-Time Operation Turning the TV set on VOLUME T/S 1 2 POWER Set the TV/CABLE/VCR switch on the Remote Control to "TV" position. To turn off the TV, press POWER again. Preparation MENU TV/VIDEO VOLUME CHANNEL T S t s T/S MENU t/s POWER TV 4 3 Basic Operation POWER Press VOLUME T/S to adjust the volume. To decrease the volume, press T . VOLUME ­ PUSH VOL RECALL MUTE o POWER 3 6 + 1 4 7 2 5 8 0 CH Selecting the on-screen display language 9 CH RTN Advanced Operation 1 s/t 100 ENT Press MENU until the Option menu is displayed on the screen. Press s or t repeatedly until "LANGUAGE" is displayed in purple. 2 LANGUAGE:[ENGLISH]FRANCAIS ESPANOL DEMO: START[STOP] C. CAPT: C1 C2 C3 C4 T1 T2 T3 T4[OFF] VOL MENU/ ENTER VOL MOVE[s t] SELECT[T S] CH TV CABLE VCR EXIT FAV CH TV/VIDEO A PLAY VOLUME T/S 3 Reference Selection Press T or S until your desired language is displayed in purple. If you select "FRANCAIS" for example, the display language changes to French. REC TV/VCR STOP LANGUE: ENGLISH[FRANCAIS] ESPANOL DEMO: MARCHE[ARRET] S. TITRA: C1 C2 C3 C4 T1 T2 T3 T4[ARRET] SLOW PAUSE REW FF BOUGER[s t] CHOISIR[T S] Understanding Auto-Power-Off feature If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically turn off after about 15 minutes. This feature does not operate in the VIDEO mode. Understanding Last Mode Memory feature If the power is cut off while you are viewing the TV and the power is resupplied, the TV is turned on automatically by the Last Mode Memory feature. If the power is going to be off or when you leave home for a long time, remove the power plug from the wall outlet to prevent the TV from turning on in your absence. 12 The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL v or w button. First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area. If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels. CHANNEL t/s 1 POWER Press MENU until the Setup menu is displayed on the screen. The selected source will be displayed in purple. MENU/ ENTER VOL CHANNEL s/t 2 CH TV CABLE VCR TV VIDEO TO SELECT PUSH TV/VIDEO EXIT FAV CH TV/VIDEO A PLAY TV/VIDEO REC TV/VCR STOP SLOW PAUSE REW FF 3 Operate the video equipment normally. About the Demonstration Mode When this function is activated, your TV will automatically display a variety of its on-screen menus and special features. This function is provided for demonstration purpose only. 1 2 Press MENU, then s or t until "DEMO" in the Option menu is displayed in purple. Press T or S to select "START". The on-screen demonstration will start after about 15 seconds. LANGUAGE:[ENGLISH]FRANCAIS ESPANOL DEMO: [START]STOP C. CAPT: C1 C2 C3 C4 T1 T2 T3 T4[OFF] MOVE[s t] SELECT[T S] To stop the demonstration Press EXIT or RECALL on the Remote or select "STOP" in the menu. 15 Reference Selection Advanced Operation Basic Operation Set up Watching TV Programs or Video input Set up Convenient Remote Functions Displaying on-screen information RECALL RECALL MUTE POWER Press RECALL to display the following onscreen information. q Channel q Stereo STEREO CAPTION TEXT TV-PG L V o Preparation MUTE 1 4 7 100 2 5 8 0 CH 3 6 9 CH RTN number or VIDEO mode selected audio status q V-CHIP rating CABLE 4 Channel Number Muting the sound CH RTN ENT Basic Operation VOL MENU/ ENTER VOL Press MUTE to mute the sound. The word "MUTE" will be displayed on the screen as shown. This is useful during telephone calls or other interruptions. To restore the sound, press MUTE again. MUTE CH TV CABLE VCR EXIT FAV CH TV/VIDEO A PLAY REC TV/VCR STOP Advanced Operation SLOW PAUSE REW FF Note: When the MUTE button is pressed, the Closed-Captioned feature "C1" is activated. ("MUTE" on the screen display will disappear. ) To deactivate, press the MUTE button again. (This feature only functions when the Closed Caption mode is set to "OFF". ) Changing quickly between two channels Press CH RTN to return to the last channel viewed. This is useful should you want to view two channels. This allows you to view two programs without entering an actual channel number each time. To operate this function Reference Selection 1 2 3 Select the first channel you want to view. (Viewing channel) Select the other channel with the Channel Number buttons. Press CH RTN. [. . . ] Commercial Units Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture tube. Owner's Manual and Demographic Card You should read this owner's manual thoroughly before operating this product. You should complete and mail the enclosed Demographic card within ten days after you, or the person who has given you this product as a gift, purchased this product. This is one way to enable TACP/THI to provide you with better customer service and improved products. [. . . ]