User manual TOSHIBA CF27C40

[. . . ] We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal. . . The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury, when the set reaches the end of its useful life please dispose of it in accordance with Local Government Regulations or at a recycling centre. ENGLISH -4- Television Thank you for buying this television which is designed to give you many years of satisfactory service. You may already be familiar with using a television but do please take time to read these instructions. They are designed to familiarise you with the unit's many new features and to ensure you get the very best out of your purchase. Special Features · Available for Cable Channels (A decoder may be required) · Wide angle perspective · 2 SCART sockets, AV Socket and external sound system connection · Minimum energy consumption · AVL ­ Automatic Volume Limiting · ATS ­ Automatic Tuning System · Blue back · Intelligent program switch · Programmed power on · Programmed power off · Graphic equalizer · On screen viewing of all control commands, program numbers and additional features · Manual Fine Tuning · 100 Program memory · Infrared Remote Control · Child Lock ENGLISH -5- For your safety This equipment has been designed and manufactured to meet international safety standarts but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points below for your own safety. [. . . ] Under normal circumstances, you will not need to use the Fine Tuning function. The AFC values of your television will automatically adjust and lock themselves to the channel. However, in the event that the TV transmitters do not work, then you may need to use this process. The method of storing the applications above is the same process as all other tuning applications. Programme Sorting Select the program sorting bar using the ( ) or down button ( ) in the Setup menu, then press the ( ) or right button ( ). Please select your desired program using the ( ) and ( ) buttons, then press the ( ) or right ( ) button. Match the program you have selected using the ( ) and ( ) buttons with the program number you want. To complete the operation press again the ( ) button. You can switch the next program you wish to another program number in the same way. Program Skipping If you want to skip some of the channels in the memory while selecting program with ( ) and ( ) buttons, select the Program Skip bar using the right button on the Manual Tuning menu. Using the Up ( ) and down ( ) buttons, the program for which you select "*" mark will be skipped. Naming Stations Teletext Select the teletext bar using the ( ) or down button in the setup menu. If you select auto with the right button; the txt broadcast and Fastext or Toptext (option) features of the existing channels. When list is selected, if the current channel does not broadcast Fastext or Toptext, you can store the teletext page numbers you want with the colour buttons or ( ) and ( ) buttons in the section there are 4 different colour buttons when you select teletext. The audio setting of the headset can be adjusted using the "VOL+" and "VOL-" buttons. Picture Set up By pressing the ( ) and ( ) or ( ) button on your remote control please enter the Picture menu. Select the setting function you want using the Up and down buttons ( )/( ) and adjust their levels with the right and left buttons ( )/( ). The picture brightness, contrast, color and sharpness levels can all be adjusted according to your desire. The changes you make in the picture settings will be automatically stored without any further actions necessary. Furthermore, you can select one of the nonadjustable default settings in the memory (Picture Mode) by pressing the ( ) button on your remote control. Picture Mode-1, 2 and 3 are preset values. Picture Mode-M is the value you store in the memory. TINT: When the NTSC video is connected from the SCART, you can adjust the colour tint setting. If you do not connect this type of video, then the TINT option will not be displayed on the OSD menu. ENGLISH -16- Features Special Features Timer Select the Timer feature in the menu and press ( ) or ( ) button. With this function, you will have the ability to automatically turn your television on or off at the time of your choice, or enable your television to shift from one channel to another at a time of your choice. Off Timer: Selecting the Off Timer bar press direction button ( ). [. . . ] NOTE 2: When the unit is in monitor mode, the Stand-by button is functional. When the unit is switched back on from the stand-by function, it will open in the TV mode. PC Mode MENU structure When you press the ( ) button on your remote control while the unit is in the PC mode, the features available in the PC mode will appear on screen as the PC MENU. In order to make the necessary adjustments in this menu, you can use the right-left, up-down movement ( )/( ), ( )/( ) buttons on your remote control. [. . . ]