User manual TOSHIBA CF27D50

[. . . ] Use a soft dry cloth to clean the panel. Never use solvents such as alcohol or thinner to clean the panel surface. The plasma display panel consists of fine picture elements (cells). Although TOSHIBA produces the plasma display panels with more than 99. 99 percent active cells, there may be some cells that do not produce light or remain lit. [. . . ] : PRO Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. · If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 27 Reducing noise in the picture Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor. Example: Setting "NR-3" Press the PROCEED button on the remote controller to display the MAIN MENU on the screen, then. . . Use the v and w buttons to select "PICTURE, " then press the PROCEED button. Use the v and w buttons to select "NR. " PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT PICTURE MODE COLOR TEMP. Press the EXIT button to return to the main menu. To close the main menu, press the EXIT button once more. Information NR · "NR" stands for Noise Reduction. · This function reduces noise in the picture. Types of noise reduction There are three types of noise reduction. Each has a different level of noise reduction. The effect becomes stronger as the number increases (in the order NR-1 NR-2 NR-3). Turns the noise reduction function off. : MEMORY :2 : OFF EXIT RETURN 3. Use the v and w buttons to select "V-POSITION". SCREEN : NORMAL MODE V­POSITION H­POSITION V­HEIGHT H­WIDTH : OFF AUTO PICTURE FINE PICTURE PICTURE ADJ. SEL. EXIT RETURN When Auto Picture is off, the Fine Picture and the Picture ADJ items are displayed so that you can adjust them. 30 Information Adjusting the Auto Picture ON . . . . . . . . . . . . . . . . . . . The Picture ADJ and Fine Picture adjustments are made automatically. The Picture ADJ and Fine Picture adjustments are made manually. Adjusting the position of the image V-POSITION . . . Adjusts the vertical position of the image. Adjusts the horizontal position of the image. (Except for JUST mode) H-WIDTH . . . . . . . . . Adjusts the horizontal size of the image. Adjusts for striped patterns on the image. * The Picture ADJ and Fine Picture features are available only when the "Auto Picture" is off. [. . . ] Depending on the type of repair required, either the service will be performed in your home or the set will be taken to the TCL Authorized Service Depot for repair and returned to your home at no cost to you. IN-HOME SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF AN AUTHORIZED TCL SERVICE DEPOT. Rental Units The warranty for rental units begins with the date of first rental or thirty (30) days from the date of shipment to the rental firm, whichever comes first. *Commercial Units Plasma displays sold and used for commercial purposes have a limited ninety (90) day warranty for all parts, labor. [. . . ]