User manual TOSHIBA CF36H40

[. . . ] Many homes, in fact, have more than one TV. The home theater entertainment experience is a growing trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands. Sometimes TVs are improperly secured or inappropriately situated on dressers, bookcases, shelves, desks, audio speakers, chests, or carts. As a result, TVs may fall over, causing unnecessary injury. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Set the television to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to select channels. For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require the use of a converter/descrambler box, you may wish to use a two-set signal splitter (sometimes called a "two-set coupler") and an A/B switch box from the cable installer or an electronics supply store. With the switch in the "B" position, you can directly tune any nonscrambled channels on your TV. With the switch in the "A" position, tune your TV to the output of the converter/descrambler box (usually channel 3 or 4) and use the box to tune scrambled channels. This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company. CONNECTION TO OTHER EQUIPMENT The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. The following connection diagrams are offered as suggestions. You may need to modify them to accommodate your particular assortment of components. TV/VIDEO SELECTION To view the picture from a VCR, camcorder, or TV game, you must put the TV in VIDEO mode first. The word "VIDEO" displays briefly onscreen. Example, to select channel 12, press "012. " Press the 2 digits in order. Example, to select channel 36, press "36. " Press the 3 digits in order. Example, to select channel 120, press "120. " 4 CH (CHANNEL) + and buttons Press and release CH (CHANNEL) + or . The channel automatically stops at the next channel set into memory. Press and hold the button down to change channels more quickly. 10-12 13-99 100-125 For proper operation, before selecting channels, they should be set into the TV's memory. See "TO MEMORIZE CHANNELS" on page 9. NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off after 15 minutes. 9 TO MEMORIZE CHANNELS This TV is equipped with a channel memory feature that allows the TV to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CABLE menu option to the TV setting. When shipped from the factory, this menu option is in the CABLE setting. TO ADD/DELETE CHANNELS 1 2 3 Press MENU. Press SET + or until the indicator next to "CH SETUP" begins to flash, then press ENTER. [. . . ] on screen No reception Make sure TV/CABLE menu option is in the appropriate mode. above If using antenna, check UHF antenna channel 13 connections. Batteries are weak, dead or inserted incorrectly. Remote is out of range; move closer to TV No Remote (within 15 feet). [. . . ]