User manual TOSHIBA CN32H95

[. . . ] 7 Analogue switch-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 CONTROLS AND FEATURES General controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Selecting positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Easy Setup using PIN (Personal Identification Number) Wireless Setup NOTE: · This feature is grayed out when the Dual Band WLAN Adaptor is not connected or Network Type is set to Wired. · Continued connection of AP (Access Point) is not guaranteed. The connection may be disconnected while watching TV. · Do not remove the Dual Band WLAN Adaptor when Network Type is set to Wireless or wireless communication is active. a b c d e f In the PREFERENCES menu, highlight Network Setup and press OK. Press B or b to highlight Wireless Setup, and press OK. Press B or b to highlight Easy Setup, and press OK. Press b to highlight Start Scan, and press OK. Press B or b to select the desired AP and press OK. NOTE: Check the MAC address on the label of the AP or in the manual, and select your AP. There are 3 methods for Wireless Setup: Easy Setup (WPS) If the AP supports WPS, this method can be used. · WPS is an industry standard designed to make connection of wireless LAN equipment and security setup easy. WPS will automatically configure all wireless settings. To save your setting, press the BLUE button. NOTE: This item is grayed out when Encryption is None. g Highlight Done, and then press OK. NOTE: If Network Name is not displayed, see step 4 and 5 in Manual Setup below to set Network Name before pressing Done. j Highlight Done, and then press OK. NOTE: When Encryption is None, a message will appear. Press C or c to select Yes and press OK. NOTE: Settings are not saved if RETURN is pressed before Done is selected. NOTE: Settings are not saved if RETURN is pressed before Done is selected. Manual Setup Enhanced 11n When Enhanced 11n is set to On, these features are available. · Dual Channel (40MHz) · GF (Green Field) NOTE: In addition, some other optional 11n features will be enabled. a b c d In the PREFERENCES menu, highlight Network Setup and press OK. Press B or b to highlight Wireless Setup, and press OK. Press B or b to highlight Manual Setup, and press OK. Press B or b to highlight Network Name, and press OK. The Software Keyboard window will appear. a b In the PREFERENCES menu, highlight Network Setup and press OK. Press B or b to highlight Enhanced 11n, and then press C or c to select On. 39 CONTROLS AND FEATURES English Wireless Information The settings configured in Wireless Setup can be confirmed. a b Press QUICK to open the Quick Menu. [. . . ] By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please contact your local city office or the shop where you purchased the product. Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol. [. . . ]