User manual TOSHIBA CN35C90

[. . . ] 7 CONTROLS AND FEATURES General controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Selecting positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 The Time Display ­ analogue only . . . . . . . . . . . [. . . ] HDMI signal information is as follows: Resolution, Scan Type, Frame Rate, Aspect, Bit Depth, Colour Space, RGB/YUV, Chroma Format, and Content Type (if available). 31 CONTROLS AND FEATURES English Using your home network This TV is a DLNA CERTIFIEDTM Player and Renderer. This TV can play digital content stored on a DLNA CERTIFIEDTM product with server function. If you want to use this TV as a DLNA CERTIFIEDTM Player or Renderer, you will have to configure the network on your TV (see page 12). If you want to use your home network, you will have to configure the network on your TV. (see page 12) Change the network settings if necessary (see `Setting up the Network' on page 33). When using a wireless home network: Wireless Interoperability The TOSHIBA Dual Band WLAN Adaptor is designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS)/Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: · The IEEE 802. 11 Standard on Wireless LANs (Revision a/b/ g/n), as defined and approved by the Institute of Electrical and Electronics Engineers. · The Wireless Fidelity (Wi-Fi®) certification as defined by the Wi-Fi Alliance®. The "Wi-Fi CERTIFIEDTM" logo is a certification mark of the Wi-Fi Alliance®. · The TOSHIBA Dual Band WLAN Adaptor is intended for use with the RV73, XV73 and MV73 series LCD TV's and should not be used with any other devices. Use of the WLAN Adaptor in other USB products may result in damage to the WLAN Adaptor and or the equipment. Such use will void any warranty that may otherwise apply, and TOSHIBA will have no liability for any damage that may result from such use. Wireless LAN and your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices, however, is far less than the electromagnetic energy emitted by wireless devices such as mobile phones. · Do not remove the Dual Band WLAN Adaptor when Network Type is set to Wireless or wireless communication is active. a b c d e f In the PREFERENCES menu, highlight Network Setup and press Q. Press B or b to highlight Wireless Setup, and press Q. Press B or b to highlight Easy Setup, and press Q. Press b to highlight Start Scan, and press Q. Press B or b to select the desired AP and press Q. NOTE: Check the MAC address on the label of the AP or in the manual, and select your AP. There are 3 methods for Wireless Setup: Easy Setup (WPS) If the AP supports WPS, this method can be used. · WPS (Wi-Fi Protected SetupTM) is an industry standard designed to make connection of wireless LAN equipment and security setup easy. WPS will automatically configure all wireless settings. Assisted Setup (setup by using the AP's notification information) Network Name, Authentication, and Encryption are decided based on information from the AP. Manual Setup (manual input of all settings) g When the PIN code window appears, enter the displayed PIN into your AP, and then press Next to continue the PIN Setup. When a message displays to report that the setup is complete, press Q. 33 CONTROLS AND FEATURES English To cancel searching for the AP: Press RETURN while searching for the AP. A message will appear, then press C or c to select Yes and press Q. [. . . ] Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. [. . . ]