User manual TOSHIBA CN36H90

[. . . ] Dusty places should also be avoided. DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND 'LIVE' PARTS. THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE. Heat Damage Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C (41°F) min. [. . . ] The remote control must be removed as the channels will still be available using the number buttons. Programmes can then be watched as normal using the controls on the television, but the television will not show the skipped programme position. 1 2 Select ATV Manual tuning. With the list of stations showing use Q or P to highlight the station to be moved and press R. The selected station will be moved to the right of the screen. Manual Tuning Prog. Channel 2 C28 3 C25 4 5 1 6 C32 C68 C22 C69 C69 C69 1 Select ATV Manual tuning from the SET UP menu. Manual Tuning Prog. Channel 2 C28 Station BBC2 ITV CH4 C-68 BBC1 Station BBC2 7 8 3 4 5 6 7 8 9 C25 C32 C68 C69 C69 C69 C69 ITV CH4 C-68 3 Use Q or P to move through the list to your preferred position. As you do so the other stations will move to make room. Repeat as necessary, then press EXIT. 4 15 General controls, time display (ATV only), stereo/bilingual transmissions Selecting Programme Positions To select a programme position use the numbered buttons on the remote control. Programme positions can also be selected using Pe and Pf. To revert to the previous programme position press Stereo and Bilingual Transmissions If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time programme positions are changed, disappearing after a few seconds. If the broadcast is not in stereo the word Mono will appear. This option is only available when watching a VGA signal source via HDMI. VGA FORMAT Press the button and a list of all the PC formats will appear on screen. Use P and Q to highlight the required format and OK to select. { Picture Size PC Normal PC Wide Using the special functions to change the size of the displayed image (i. e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws. 19 Picture controls Most of the picture controls and functions are available in both digital and analogue modes. PLEASE NOTE: features not available will be greyed out. Picture Position The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs. Backlight Adjusting the Backlight can improve the clarity of the screen when viewing. 1 1 In the SETUP menu press Q until Picture Position is highlighted. In the PICTURE menu press Q to select Picture Settings, then press OK. SETUP Picture Position Quick Setup Software Upgrade System Information Reset TV 2/2 PICTURE Picture Settings Active Backlight Control 3D Colour Management Base Colour Adjustment MPEG NR DNR Low Auto On Off 2 3 Press OK to view the options available for the picture format that has been selected. Press P and Q to select an option, then S or R to adjust the settings. The options alter depending on the widescreen format chosen and when viewing connected equipment. In Cinema 2: Picture Position Horizontal Position Vertical Position Reset 2 3 In the Picture settings menu press Q to select Backlight. Press S or R to adjust. Picture Settings Picture Mode Backlight Contrast Brightness Colour Tint Sharpness Black/White Level 100 100 50 50 0 0 High 1/2 Dynamic 0 0 To return to the original factory settings select Reset in the Picture Position menu and press OK. 20 Picture controls (continued) Picture Preferences This television offers the choice of personalising the picture style. Press to view the different styles available: Cinema mode If there are lines or jagged edges in the film or programme being viewed, selecting Cinema mode can help correct this by smoothing out the picture. m Dynamic, Standard, Mild and Movie are preset options and effect many features/settings within the television. Settings can be personalised as detailed below. PC option is available in HDMI input mode. 1 2 In the Picture Settings menu press Q to select Cinema Mode. [. . . ] If the text is unreadable or garbled, check the aerial. Go to the main index page of the text service and look for the User Guide. This will explain the basic operation of text in some detail. If further information is needed on how to use text see the text section. Q A Q A Why are some of the digital subscription channels unavailable? Q A Why are there no analogue text sub-pages? There are none broadcast or they have not yet loaded. [. . . ]