User manual TOSHIBA DL502B2

[. . . ] These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiates radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. WARNING: Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties authorized by Toshiba, could void the user’s authority to operate the equipment. [. . . ] • When connecting the REMOTE MOUSE RECEIVER to the USB PORT for the first time, insert the “Windows98 CD-ROM” and install the device drivers for a USB interchangeability device and a USB human interface devices (two kinds). The installation starts automatically when you connect a USB mouse cable connected to the remote mouse receiver to the USB port of your computer. PV-98 IBM/Mac USB SERIAL PORT IBM/MAC Mouse cable (supplied) PS/2 Mouse adapter (supplied) PS/2 MOUSE PORT MAC Mouse adapter (supplied) Macintosh MAC MOUSE PORT REMOTE MOUSE RECEIVER (supplied) (Continued) Operations (Continued) CONTENTS To drag and drop While holding down the center of the pointer control, press the rim and release the center. Notes • The remote control operating range is about 5 meter from the front of the remote sensor. • The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor. 26 Operating the computer by the remote control Use the supplied remote control pointing it at the connected REMOTE MOUSE RECEIVER. AUTO SET ON/STANDBY KEYSTONE MARKER LASER POINTER/PJ selector POINTER PJ Pointer control L-CLICK R-CLICK MENU RGB ENTER VIDEO CAMERA R-CLICK L-CLICK RESIZE RESET FREEZE Preparation Set the POINTER/PJ selector to “POINTER”. To move the pointer Press the pointer control. The pointer moves to the pressed direction. To left-click Press L-CLICK. To right-click Press R-CLICK. Adjustments CONTENTS H-position : To shift the image position horizontally V-position : To shift the image position vertically. Bass : Treble : 27 Settings and adjustments on the menu Most of adjustments and settings are made on the menu. To display the menu, press MENU. To adjust the bass of the sound output. To adjust the treble of the sound output. Picture 32 Default 28 The followings are adjustments and settings on the menu. When using this projector for the first time, see “Default”. 28 Keystone Auto set : Adjust : 30 To correct the keystone distortion automatically. To make the correction of keystone distortion beyond the automatic correction. Contrast : To adjust the contrast. or to make the setting. AUTO SET ON/STANDBY KEYSTONE 2-4 MARKER LASER 1, 5 POINTER PJ L-CLICK R-CLICK MENU RGB ENTER VIDEO CAMERA RESIZE RESET FREEZE RESET To select another item, go back to step 3. Language Select a language for the menu or onscreen displays. English: English Français: French Deutsch: German Italiano : Italian Español : Spanish Português : Portuguese : Japanese 1 Press MENU to display the menu. Ke y s t o n e Au t o s e t Ad j u s t – + Adjustments (Continued) CONTENTS 29 Scrn display On: Off: On-screen displays (indications of input selection, signal absent or mute mode, etc. ) appear. On-screen displays do not appear. 5 Press MENU. The menu disappears. Notes • These settings are stored until you turn the power off. • To store the settings even if the power is turned off, follow the procedure of “Saving data”. 34 • Pressing RESET will return the adjustment or setting currently selected to default. Adjustments CONTENTS 30 Keystone correction – Keystone Preparation • Display the image as explained in “Picture Projection”. 21 • Set the POINTER/PJ selector to “PJ”. 1 Press MENU to display the menu. 2 Press or to select . Ke y s t o n e Au t o s e t Ad j u s t – + Notes • Pressing KEYSTONE on the remote control can also correct the keystone distortion automatically. 22 • These adjustments are stored until you turn the power off. • Pressing RESET will return the adjustment or setting currently selected to default. • Pictures may be slightly deteriorated by the keystone correction. SELECT/ADJUST ON ON/STANDBY MENU ENTER INPUT LAMP TEMP 3 Press to select “Auto set”. 0 degrees setting for the automatic keystone correction Depending on the operating condition such as vibration, the distortion may be beyond the automatic keystone correction. The horizontal condition setting (0 degrees setting) may be disordered. [. . . ] IBM, DOS/V, VGA, SVGA, XGA, SXGA, UXGA are trademarks or registered trademarks of International Business Machines Corporation. Macintosh is a registered trademark of Apple Computer, Inc. Windows is a registered trademark of Microsoft Corporations in the U. S. and other country. The design and specifications are subject to change without notice. Others CONTENTS 53 LIMITED WARRANTY TOSHIBA TLP600/400 Series 3LCD Data Projector Toshiba America Consumer Products, Inc. [. . . ]