User manual TOSHIBA DRWST-50A51A

[. . . ] TEC TEC Drawer Unit Owner's Manual Original Jul. , 1996 (Revised ) DRWST-50A/51A SERIES Document No. EO1-19023 Table of Contents TEC CORPORATION l Request Regarding Maintenance H Utilize our maintenance services. After purchasing the machines, contact your sales agent once per year or so to have the inside of the machines cleaned. [. . . ] 1) Soak a cloth in the detergent fluid and wring it out tightly. 2) Finish by wiping the machines off with a dry cloth. - VIII - DRWST-5OA61 EOl-19023 A SERIES TABLE OF CONTENTS Page . Tokyo, JAPAN EOl-19023 DRWST-SOA/SlA SERIES 1. INTRODUCTION Thank you for purchasing the TEC DRWST-5OA/51A Series Remote Drawer. This drawer can be connected to various terminals including the ST-5500, FF-5501, etc. , which has been developed as a high-grade POS terminal. Large Type Drawer is provided for the DRWST50A Series and SP Type Drawer for the DRWST-51A Series. The Large Type Drawer has the holes for attaching the LIUST-51 (Pole Type) and the printer I/F cable. 1. I Precautions 1) 2) Do not subject the equipment to sudden shocks. The cover should be cleaned by wiping with a dry cloth or a cloth slightly dampened with a mild detergent solution. NEVER USE THINNER OR ANY OTHER VOLATILE SOLVENT on the plastic covers. DO NOT POUR WATER directly onto the drawer and NEVER IMMERSE THE DRAWER IN WATER. 3) 4) 5) 6) Avoid using in locations subject to vibration and direct sunlight. Be sure to install the equipment Be sure to use the equipment relative humidity. within the proper ranges of power, current consumption, temperature and 7) 8) Do not roughly open or close the drawer. Never attempt to modify the TEC equipment by yourself. 2. APPEARANCE l AND NOMENCLATURE Large Type (DRWST-5OA) Through-hole for the printer I/F Cable Hqle for attaching the LIUST-51 (Pole Type) \ \ rawer Cable -Cash Box I Media \ slot \ Drawer Release Lock -l- DRWST-50A151A EOl -19023 SERIES l SP Type (DRWST-51 A) Media Slot \ \ D-Cap Accessory Parts Drawer Release Key (2 PCS. ) Cash Drawer Cover Key (2 PCS. ) 3. INSTALLING WA RMNG Turn the POWER THE DRAWER SWlTCH to OFF of Main Control Unit before connecting the cab/es. When connecting the first drawer to the ST-5500 terminal, to DRWlT of Main Control Unit. connect the connector of the Drawer Cable Drawer Cable -2- DRWST-50N51A EOl -19023 SERIES 4. HANDLING l OF THE DRAWER Manual cash drawer releasing Opening the Drawer Usually, the drawer is released automatically on finalizing each transaction. [. . . ] Press the cover lightly, insert the key into the key-hole on the cover, and turn it to lock. . Unlocking Unlock the cover using the key, and lift the front end. Fig. 3 -3- DRWST-5ON5iA EOl -19023 SERIES l Process of cables of each module (DRWST-MA) If the DRWST-5OA Drawer (large type) is used, pass the cables through the space at the rear side of the drawer by removing the drawer back cover. Drawer 5. SPECIFICATIONS Size Large Type: SP Type : 510 mm (including 460 mm (including 12Kg 10Kg (W) x 455 mm (D) x 115 mm (H) the rubber feet) (W) x 400 mm (D) x 115 mm (H) the rubber feet) Weight Large Type : SP Type : 0. 2 A Max. Power Consumed interface with the Control Unit Drawer open signal and drawer detection signal (Power is supplied by the Control Unit : DC + 24 V) 0°C to 40°C 10% to 90% RH (with non condensation 1. 6 m allowed) Ambient Temperature Relative Humidity Cable Length -4- TEC TEC -CORPORATION 3C* PRINTED EOl-19023 IN JAPAN [. . . ]