User manual TOSHIBA 19DV734G

[. . . ] LCD TV/DVD COMBINATION 19DV733G 19DV734G 22DV733G 22DV734G 26DV733G OWNER'S MANUAL Owner's Record The model number and serial number are on the back of your TV/DVD. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV/DVD. ©2010 Toshiba Corporation Before operating the unit, please read this manual thoroughly. [. . . ] By default, the services listed on the screen is TV mode. If you wish to view the list of Radio services without exiting the current menu, press TV/RADIO once. If you wish to view the list of Data services without exiting the current menu, press TV/RADIO twice. · Service List Displays all the available services. As you scroll through the service list by pressing / , the Event List will be refreshed accordingly, and you will see the programme information for the currently highlighted programme(s). To scroll through the service list from page to page, press the Red/SLOW or Green/ PAUSE button. · Event List Displays events in a grid of rows and columns. Each row shows a list of events that are available for the corresponding service in the service list. Within each row, you can press to navigate through the rest of the events. You can easily move to the Previous day or Next day in the Event List by pressing the Yellow/PLAY MODE or Blue/SLOW button (the date of the programme you are currently viewing is shown on the top right corner). The full event name will be displayed in the bar above. Event title will be displayed only if available; otherwise "No Event Name" message will be displayed. 3 From the Guide menu, you can open the Description menu for the currently highlighted programme(s) by pressing . The Guide/Description menu shows extended descriptions of an event. You can scroll and view the complete descriptions of the event using /. To clear the menu screen, press EXIT/CANCEL 50 EPG Timer (DTV mode only) You can choose whether or not to switch on your TV screen when a timer event begins (see page 34: Rec Screen Status (LCD Power on/off)). This is so that if you are using the timer to make a recording from your VCR or other device, the TV screen will not turn on unless you want it to. If you try to interrupt your event timer in any way, e. g. switching to another channel, while the timer event is in progress, the following message will appear: "Warning: Changing the channel will interrupt your event timer. Select Yes or No according to your wishes. 1 Press GUIDE to display the EPG menu. 2 Press / / / to highlight the programme you want to set as a timer event, and then press ENTER/CH LIST . Note: · To display the stored timer events, press GUIDE twice, and then the Event Timer menu (see step 4 below) will appear. You can also delete or change the frequency (Once/ Daily/Weekly) of the stored timer events, but please note that you cannot edit the time details that have been set from the EPG. 3 4 A confirmation banner will display on-screen. Press / to select Yes or No, and then press ENTER/CH LIST option is shown in blue). Press the Red/SLOW button to set the timer mode for a selected event. (the selected 5 The frequency of Timer wake-up specified by the Timer mode can be set as Once, Daily or Weekly. [. . . ] disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental, special, exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such damage. Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following restrictions: 1. [. . . ]