User manual TOSHIBA EQUIUM A100

[. . . ] Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. MS, MS-DOS, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. HyperMemoryTM is a trademark of ATI Technologies, Inc. The ExpressCard word mark and logo are owned by the Personal Computer Memory Card International Association (PCMCIA) and any use of such marks by Fujitsu Computer Systems Corporation is under license. [. . . ] Select the appropriate key index for your WLAN. The key index must be identical to the WEP key index used by the Access Point. If your network does not employ a 802. 1x/EAP security mechanism, please skip to step 24. Click the Enable 802. 1x checkbox to enable the 802. 1x security option. Please contact your network administrator if configuration of this setting is required. Select the appropriate Authentication Type. Please contact your network administrator if configuration of this setting is required. After selecting authentication type, enter the name, domain, and password of the user you have created on the authentication server. The user name and password do not have to be the same as name and password of your current Windows user login. 3. Configure network settings TCP/IP settings Workgroup or Domain settings. CONFIGURATION USING INTEL PROSET FOR WIRELESS UTILITY This section explains the procedure to properly configure the WLAN device using the Intel PROSet for Wireless utility. Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters: Network Name - Also known as the SSID Network Key (WEP) - Required if using static WEP keys. Any name can be assigned for each personal computer. To change the name, click [Change], then proceed in accordance with the instruction messages displayed on the screen. 3. 2. Click the [Start] button first and then [Control Panel]. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. (If you are already in Classic view, "Switch to Category View" will be displayed. ) Double-click [Network Connections]. A list of currently installed networks will be displayed. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu displayed. The [Wireless Network Connection Properties] window will be displayed. Click the [General] tab if it is not already selected. Click [Internet Protocol (TCP/IP] and then click [Properties]. The [Internet Protocol (TCP/IP) Properties] window will be displayed. 6. Enter the desired name in less than 15 ASCII character code format. [. . . ] System Clock An oscillator of fixed precise frequency which synchronizes the operation of the system and is counted to provide time of day and date. TFT Thin Film Transistor ­ A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually. UL Underwriters Laboratories ­ An independent organization that tests and certifies the electrical safety of devices. A computer architecture that uses graphics chips on the motherboard that use part of the main memory for video memory. 94 EQUIUM A100-02. book Page 95 Tuesday, May 16, 2006 10:48 AM Glossary USB Universal Serial Bus. [. . . ]