User manual TOSHIBA FS-3600 PC WORKSTATION

[. . . ] PCWS FS-3600 PC WorkStation Owner's Manual TEC America, Inc. FS-3600 PC Work Station TEC AMERICA, INC. 90-DAY LIMITED WARRANTY FS-3600 PC WORK STATION SOFTWARE Warranty BEFORE USING THIS PRODUCT, YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS. YOUR USE OF THIS PRODUCT INDICATES YOUR ACCEPTANCE OF THESE TERMS. IF YOU DO NOT AGREE WITH THEM, YOU SHOULD NOT USE THIS PRODUCT AND SHOULD PROMPTLY RETURN THE PRODUCT TO THE SELLER. [. . . ] · Response entry can be up to 20 alphanumeric characters. · This can be useful for recording a bag number that contains the pickup. · This flag is only checked if the Prnt Loan/Pkup Chit flag is enabled. · Enter the number of minutes that a station can be idle in Manager Mode before the system should automatically log the operator out of the system. · This security features helps prevent unauthorized access to manager mode. · Enter the number of minutes that a station can be idle in POS mode before the system should automatically log the operator out of the system. · This security features helps prevent unauthorized access to the system because an operator left a station unattended without first logging out of the system. · This flag signals to maintain and report the non-resettable grand totals for balancing and security purposes. · The NRGT is the OPENING and CLOSING numbers of the Financial report. · This flag allows the system totals to be reset if there are any open checks in the system. · If this flag is not set, the system totals cannot be cleared with open checks. Check Box (Toggle Checked for Yes or Un-Checked for No) Check Box (Toggle Checked for Yes or Un-Checked for No) Mgr AutoLogout 2 Digit Numeric POS AutoLogout 2 Digit Numeric Use NRGT Check Box (Toggle Checked for Yes or Un-Checked for No) Check Box (Toggle Checked for Yes or Un-Checked for No) Z w/open Chks - 81 - POS Configuration Field Name Cut After Rpt Description FS-3600 PC Work Station Entry Type Check Box (Toggle Checked for Yes or Un-Checked for No) PTD Totals Rpt Closed Chks Restrict Stn Z Rpt Svr Sales Blind Deposits · If this flag is set, the system will send a cut command to the report printers after printing a report. · When printing an auto-sequence report like an X Report or a Z Report, the system will only cut the report when it has completed the autosequence. · Set this flag to enable period-to-date system totals tracking. · If this flag is set, the system will update the PTD totals each time the daily totals are reset. · If Period-To-Date totals are not used, turn this option off to save system resources. · Another selection is made from System Reports on the Reports Menu. · The new selection will prompt to select between Daily Reports and Period Reports. · Set this flag to print a closed check summary on the System Financial Report. · Set this flag to restrict the Z Report from being run on stations that do not have the Allow Z Report flag enabled in the Station Table. · Set this flag to include a summary of sales by server section on the System Financial Report. · Set this flag to suppress the Total Due field on the deposit screen and to suppress the over/ short confirmation when exiting the deposit screen. · Select the format of the Hourly Productivity Report. [. . . ] When Period Close is selected the Daily Z selection is checked and grayed out. - 154 - FS-3600 PC WorkStation Ø Ø Select the appropriate box to close "Sales" and/or "Labor". Utilities Click on the "Start Z" Button to start the Z Process. All FS-3600 terminals should be powered on and all Users should log out. Several prompt messages will guide you through the Z process. · Reset Totals?The Z Process will always ask if totals should be reset. [. . . ]