User manual TOSHIBA FT6515BK

[. . . ] Do not use this product near water (for example, near a bath tub, kitchen sink, or swimming pool). Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. Slots and openings in the cabinet and the back or bottom are provided for ventilation. [. . . ] 2 If you wish to change how the number is stored, press # . The screen displays any alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1+ number). 3 Press SELECT, then press until PGM flashes. DIAL ERASE PGM 800-595-9511 5/01 5:40PM OLD 28 4 Press SELECT three times. 8005959511 5/01 5:40 PM N OLD 28 Display Screen Messages Screen Displays: PRIVATE OUT OF AREA When: The other party is blocking name and/or number information. Your phone company is unable to receive information about this caller's name and/or number. * (after the name) This caller has called you more than once. 23 Basic Operation 5 6 Press or to select Y or N for distinctive ring option. You will hear a beep confirming that the name and number were stored. If you choose Y in step 5 a D will be displayed with the directory entry. Answering System Operation At The Base Audible Indicators This system gives you voice prompts for feature operations and voice confirmations when you press a button or complete an operation. The system announces the clock setting, then announces: "To Set Day and Time, press TIME/SET. " 3. Press SELECT until the system announces the correct day, then press TIME/SET. Press SELECT until the system announces the correct hour, then press TIME/SET. The system plays back your recorded message. To review your announcement at any time: 1 Press MENU until you hear "Set Outgoing Message. " 2 Press any MAILBOX button. To delete your announcement: Press DELETE during announcement playback. The system will use the pre-recorded announcement until you record a new one. 25 Basic Operation Answering System Operation At The Base Setting Up Your Answering System You can set up one feature at a time, or you can set up a feature and then move on to set up another feature. Press MENU until the system announces the feature you want to set. Refer to the "Feature Summary" below for a description of the features and your choices. Press SELECT until the system announces the desired setting. Press TIME/SET to confirm your selection. Press MENU to move on to the next feature, or press a MAILBOX button to exit Feature Setup. Feature Summary Default settings indicated by * . System announces: Description/directions: System announces: Description/directions: "Set Security Code" Basic Operation 50* Use SELECT to choose the remote access code you will use to access features and functions of the answering system from a touch tone phone. You can select any 2-digit code, from 40 to 99. Note: To advance the remote access code by 10, press and hold SELECT. "Set Audible Message Alert " When Message Alert is turned on, the base beeps Off * once every 10 seconds when new messages On have been received. [. . . ] The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Notice: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. [. . . ]