User manual TOSHIBA FT7515

[. . . ] For your future reference Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer Accessories (included) For extra orders, call 1-800-332-5368. AC Adaptor (p. PQKL10038Z3 (Black, Blue, Silver) PQKL10038Z1 (White) one Telephone Line Cord (p. PQKE10127Z1 (Black, Blue, Silver) PQKE10127Z2 (White) one one 2 For Best Performance Battery Charge A rechargeable Ni-Cd battery powers the handset. Charge the battery for about 6 hours before initial use (p. [. . . ] 40). ·To move the cursor, press BACK Ü or FWD/EDIT á. ·If a name is not required, press Ö (Next key) and go to step 5. Enter name IH G=Next Enter name Tom Jones IH G=Next 4 5 6 7 Press Ö (Next key). Enter phone no. Enter a phone number, up to 22 digits. ·If you misdial, press (INTERCOM/CLEAR). To erase all digits, press and hold (INTERCOM/CLEAR). Advanced Operation 0987654321 IH G=Next Press Ö (Next key). ·If you want to change the storing name or number, press Ñ (Edit key) repeatedly to reach the desired display and change it. Tom Jones 0987654321 F=Edit H=Save Press FWD/EDIT á (Save key). ·To continue storing other items, repeat from step 2. 0987654321 ·To return to the standby mode, press (FUNCTION/EXIT/CH). ·If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone number in step 5. ·You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH). ·If the display shows "Directory full" in step 2, press (FUNCTION/EXIT/CH). To erase other stored items from the directory, see page 45. ·After the maximum of 50 items has been stored, "Directory full" is also displayed. ·If 3 beeps sound and the display shows "Save error", move closer to the base unit and start again from step 1. 39 Using the Directory Selecting Characters to Enter Names TALK DIRECT ON OFF The handset dialing buttons ((0) to (9)), BACK Ü and FWD/EDIT á can be used to enter letters and symbols. ·To erase other items, repeat from step 3. ·To return to the standby mode, press (FUNCTION/EXIT/CH). Clear Advanced Operation 45 ·You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH). Voice Mail Service Voice mail service is an electronic on-line answering system offered by your telephone company. After subscribing, the voice mail system can answer calls automatically when your line is busy or if calls are not answered. Callers can leave messages by following the pre-recorded instructions. When voice mail messages are recorded, "Voicemail" and " " will be displayed and the VOICE MAIL indicator on the base unit will flash. To use this feature, you must first store your access number. Storing a Voice Mail Access Number Make sure the unit is in the standby mode initially. 1 2 3 4 5 6 Press (FUNCTION/EXIT/CH). Press Ö or Ñ repeatedly until the arrow points to "Program", and press FWD/EDIT á (Yes key). Press Ö or Ñ repeatedly until the arrow points to "Save mailbox#", and press FWD/EDIT á (Yes key). Enter your access number, up to 32 digits. ·You may enter pauses*. ·If you enter a wrong number, press (INTERCOM/CLEAR). To erase all digits, press and hold (INTERCOM/CLEAR). [. . . ] --Consult the dealer or an experienced radio/TV technician for help. Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, move the cordless telephone further away from the TV or VCR. [. . . ]