Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TOSHIBA FT7517. We hope that this TOSHIBA FT7517 user guide will be useful to you.
Lastmanuals help download the user guide TOSHIBA FT7517.
Detailed instructions for use are in the User's Guide.
[. . . ] 2. The use of high capacity batteries is recommended for maximum operating life between battery changes.
This feature is used to check activity on the current channel before transmitting. You can also adjust the volume by pressing the UP/DOWN button when monitoring. Press the MODE button for 1 second, and the monitor feature will be activated until the MODE button is released. Do not transmit if someone is talking on the operating channel. [. . . ] It is recommended that you do not use the radios closer than 5 feet due to heavy
1. Turn the radio on while pressing the DOWN button. "SC" will appear for indication. You can change the scan direction by pressing the UP/DOWN button. The scan functioin will stop if there is a signal present on a channel, and will resume about 3 seconds after signal drop out. Press the MODE button or turn the radio off to exit channel scan. During scanning, the CTCSS feature is disabled. Transmitting is allowed during scanning. When the PTT is released, the radio will wait for an answer for 5 seconds before starting to scan again. This feature helps you to detect and set the correct CTCSS code for a received signal. By monitoring a received signal, you can determine its correct CTCSS code used on the air. Check your CTCSS code or disable the CTCSS feature. Turn the radio on by pressing the MODE and DOWN buttons. Turn the radio on by pressing the UP and DOWN buttons simultaneously with the POWER button to activate the beep. Confirm that the ground connections between the speaker and microphone are separate.
Key Lock
The key lock feature prevents accidental channel changes and accidental function activation. Only the PTT and the POWER buttons will be available. Turn the radio on while pressing both the MODE and DOWN buttons. "Lc"(Lock) will appear for indication. Repeat 1 and 2 to exit the key lock mode. The factory default settings are Channel 1/CTCSS disabled/Volume 8. You can reset the radio to the initial state by the following procedures. Turn the radio on while pressing the MODE, UP, DOWN and the PTT buttons to return to the factory default settings. [. . . ] This warranty gives you specific rights. You may also have other rights that vary from state to state.
Automatic Power Off
Radio will not work with an external speakermicrophone
WARRANTY
WHAT DOES OUR WARRANTY COVER?FOR HOW LONG AFTER THE ORIGINAL PURCHASE?To the original purchaser only - ONE YEAR. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA FT7517
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA FT7517 will begin.
