User manual TOSHIBA FT9005

[. . . ] Do not use this product near water (for example, near a bath tub, kitchen sink, or swimming pool). Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. Slots and openings in the cabinet and the back or bottom are provided for ventilation. [. . . ] · Press ON or SPEAKER key to dial the number. VTech Com 17 Basic Operation Calls Log (Caller ID - Call Waiting) Deleting Caller ID · Follow the steps in Reviewing Caller ID to scroll to the record to be deleted. · Press DELETE key to erase the desired record. A confirmation tone will sound and the previous Caller ID record will be displayed. · To delete all the Caller ID records, press and hold the DELETE key. The screen will ask you DELETE ALL CALLS?Or, press OFF to return to the CID record previously displayed. VTech Com Basic Operation 18 Handset Settings Ringer Volume · From the idle (OFF) mode, press SEL then the or keys to RINGER VOLUME. · Press the or keys or enter digit 0-6 to the desired ringer volume. The current ring tone is played and the volume bar is increased/decreased each time the setting is adjusted. At the lowest setting, display will show: The Handset will not ring when a call comes in if Ringer Volume is setted to the lowest setting. Ringer Tone · From the idle (OFF) mode, press SEL then the or keys to RINGER TONE. · Use the or keys to select the desired option. Use the or keys or enter digits 0-9 to sample the ring tones. Once you have a compatible 2. 5mm Headset, locate the Headset Jack on the ip 5821 Handset. Connect the plug on the Headset cord to the jack (under a small rubber flag) on the cordless Handset. Do not force the connection. Advanced Operation NOTE: · Whenever a compatible Headset is connected to the cordless Handset, the microphone on the Handset will be muted. This is done to limit the effect of background noise. · When a compatible Headset is connected to the cordless Handset, your Speakerphone feature will be disabled. To use your Speakerphone feature, simply disconnect the Headset from the Handset. Belt Clip The ip 5821 is also equipped with a detachable belt clip. Align the pins on the inside edge of the clip with the notches on the sides of the Handset. The belt clip should snap securely into place. Don't force the connection. 22 In Case Of Difficulty If you have difficulties in operating your phone, the suggestions below should solve the problem. If you still have difficulties after trying these suggestions, call TOSHIBA Communications at 1-800-595-9511. In Canada, call TOSHIBA Telecommunications Canada Ltd. at 1-800-267-7377. The Phone Doesn't Work At All · Make sure the Power Cord is plugged in. [. . . ] If you do, please keep three things in mind: a. We recommend that you also write the telephone number on the directory card, so that you can still dial the emergency number manually if the memory dialing feature doesn't work. This feature is provided only as a convenience, and the manufacturer assumes no responsibility for customer reliance upon the memory feature. Testing the emergency telephone numbers you have stored is not recommended. [. . . ]