User manual TOSHIBA FT9305

[. . . ] (found on the bottom of the base unit) Date of purchase Name and address of dealer This model is designed to be used in Germany and Austria. To use in Austria, reset the base unit by selecting "Österreich" as the country (Seite 29). Hinweis: L This equipment is designed for use on the Germany and Austria analogue telephone network. L In the event of problems, you should contact your equipment supplier in the first instance. [. . . ] 4 Select "Andere Optionen", then press {>}. 6 Enter the new 4-digit base unit PIN, then press {j/OK}. 7 Press {ih}. ­ Private mailbox settings for SMS ­ Caller list L The following items will be retained: ­ Date and time ­ Shared phonebook entries ­ Repeater mode ­ Recordings, including your greeting message, caller messages, voice memos, audible call announcements, and recorded conversations L If you select "Österreich" as the country in step 6, the following default settings will be changed for Austria: ­ Message centre 1 and 2 (Seite 38) ­ Recall time (Seite 25) ­ Emergency number (Seite 25) L After resetting the base unit, you will not be able to make or receive calls for a few moments. Resetting the base unit to its default settings 1 Press {j/OK}. 2 Select "Basis-Einstell. ", then press {>}. 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it (Seite 29). 4 Select "Andere Optionen", then press {>}. 5 Select "Basis Zurückst. ", then press {>}. 6 Select the desired country, then press {>}. 7 Select "Ja", then press {>}. 8 Press {ih}. Hinweis: L The following items will be deleted or reset to their default settings: ­ Settings listed on Seite 25, 38, 46 ­ All SMS messages 29 TCD220G(e-g). book Page 30 Thursday, January 20, 2005 11:43 AM Caller ID Service Using Caller ID service Wichtig: L This unit is Caller ID compatible. To use Caller ID features (such as displaying caller phone numbers), you must subscribe to Caller ID service. Consult your service provider for details. Caller ID features When an outside call is received, the caller's phone number can be displayed. L Phone numbers of the last 50 different callers will be logged in the caller list. L While listening to a message recorded by the answering system, you can call back the caller without having to dial the phone number (Seite 43). If you record an audible call announcement for a shared phonebook entry (Seite 16), the audible call recording will be announced when you receive a call from that person. Hinweis: L If the handset ringer is turned off, audible call announcements will not be heard. 30 TCD220G(e-g). book Page 31 Thursday, January 20, 2005 11:43 AM Caller ID Service Caller list Viewing the caller list and calling back Phone numbers of the last 50 different callers will be logged in the caller list. When the 51st call is received, the oldest caller information will be automatically erased. You can use this list to return missed calls. 2 Select "Anruferliste", then press {>}. 3 Press {v} repeatedly to search from the most recent call, or press {e} repeatedly to search from the oldest call. L If the item has already been viewed or answered, "Q" is displayed, even if it was viewed or answered using another handset. 4 Press {C} or {s} to call back the displayed party. 3 Press {e} or {v} repeatedly to display the desired entry, then press {j/OK}. 4 Select "Löschen", then press {>}. 5 6 L To erase all entries, select "Alle löschen", then press {>}. Select "Ja", then press {>}. Press {ih}. Storing caller information into the handset phonebook 1 Press {j/OK}. [. . . ] L Your phone number is permanently withheld or you have not subscribed to the appropriate service. L When an error code is displayed, "Q" will not be displayed even if you have read the message. "FD" is displayed. "FE" is displayed. "E0" is displayed. "Q" is not displayed after you read a message. An error code ("FD", "FE", or "E0") is displayed. Answering system Problem The other party complains that they cannot leave a message. [. . . ]