User manual TOSHIBA GIGAFRAME L80/81

[. . . ] TOSHIBA and Microsoft make no representations, warranties or other determinations that ANY use of the software product listed above is legal, safe, or in any manner recommended or intended while driving or otherwise operating a motor vehicle. General Operation Prolonged Views of Screen If you are driving, do not access any function requiring a prolonged view of the screen. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time. Volume Setting Do not use this product while driving a car. [. . . ] -The surface temperature of the AC adapter may increase while the power is on, but this does not mean the adapter is faulty. Before carrying, unplug the AC cable and wait until the AC adapter cools. -Buzzing noises may occasionally be heard from the inside of the AC adapter, but this is not abnormal. -Using the AC adapter near a radio, television or cellular phone may cause radio interference, so use the adapter at a sufficient distance from such appliances/devices. The supplied AC cable is designed for use in the particular region. When using the product overseas, provide a separate AC cable conforming to the local standard. 17 Parts diagram a i b a b Headphone /V-OUT jack Lock switch Slide this switch in the direction of the arrow to lock the gigabeat to prevent inadvertent button operations. POWER button SKIP button PLAY/PAUSE button SKIP button c c d j e f k n g l m + d VOL(+)/VOL(-) button e f g VOL. h AC adapter jack i Strap attachment hole j Display screen (Color screen) k l BACK button START button h m Plus Touch button op q n OK button (referred to as "ok" in this manual) o BATTERY switch Comes from the factory in the "off" position. When not using the gigabeat for extended periods, switch this to "off" and it will extend the life of your battery. p USB2. 0 connector q Connect terminal !Note -Use only Toshiba authorized accessories when connecting to the pin connector at the bottom of the unit. 18 Setting Up the gigabeat Set Up Charging the Built-in Battery When charging the gigabeat for the first time, make certain to fully charge the battery. Preparation Set the BATTERY switch on the bottom of the main unit to ON. Using the AC Adapter Connect the AC adapter to the gigabeat in the order A to C shown below. It takes approximately 3 hours to fully charge the gigabeat. C Connect to outlet B A Battery icon display Battery Status Charging Fully charged Charging completed 19 Charging via the USB Cable Connect the gigabeat to the PC via the supplied USB cable. / Note -If Windows Media® Player 10 is not installed on your PC, the gigabeat cannot be connected properly. To transfer music, video and photo data to the gigabeat via PC, use Windows Media Player 10. !Note -Even when Windows Media Player 10 is already installed on the PC, continue the installation procedure. Files necessary to work with the gigabeat will be installed on the PC. a Insert the included CD-ROM into the PC. b Click the "Install Windows Media Player 10" button. Even when Windows Media Player 10 is already installed on the PC, continue the installation procedure. Files necessary to work with the gigabeat will be installed on the PC. c Follow the on screen instructions 23 Connecting the gigabeat to Your PC To transfer tracks and other data to the gigabeat, connect the gigabeat to your PC via the USB cable. a Turn on the PC. c Using the USB cable, connect the PC and gigabeat. To the USB terminal on the PC -The gigabeat is automatically turned on when connected to the PC. -When connecting to a PC for the first time, the "New Hardware Wizard" is sometimes displayed. If this happens, insert the included CD-ROM into the PC's CDROM drive. -When you first connect the gigabeat to the PC, you will see an operation screen appear (>p. 29). !Note -If the battery is low when you connect the gigabeat to your PC, you should also plug in the AC adapter otherwise some of the data being transferred could be lost. -While transferring data to the gigabeat, never disconnect the USB cable or AC Adapter. If the screen displays "Updating", do not disconnect the gigabeat. [. . . ] 5 Select the language to switch back to and press the OK button. 6 Press the left or right of the Plus Touch button to select "yes" and press the OK button. The gigabeat restarts and the selected language is displayed. 98 Others Specifications Audio format - WMA (Windows Media Audio) - WMA 9 Lossless - MP3 (MEPG-1 Audio Layer3) - WAV (PCM) Video format Photo format Sampling frequency Bit rate Recording media Maximum Recording time Continuous playback time WMV (Windows Media Video) JPEG (9000 x 6000 max. ) 8 to 48 kHz (>p. 101) (Audio data) 4 to 320 kbps (>p. 101) (Video data) Less than or equal to 800kbps Bit rate of the video data is that of audio + video. S60V Internal hard disk 60 GB (*1) S30V Internal hard disk 30 GB (*1) (Audio data) S60V Approx. [. . . ]