User manual TOSHIBA HVS16-240-X SOFTWARE MANUAL

[. . . ] XVS - DVS - HVS Digital Video Recorder Software Manual model no. XVS4-120-X XVS16-240-X XVS16-240V-X DVS8-240-X DVS8-240H-X DVS16-480-X DVS16-480H-X DVS32-240-X DVS32-480-X HVS16-240-X HVS16-480-X HVS16-480H-X HVS32-240-X HVS32-480-X Please carefully read these instructions before using this product. Save this manual for future use. 1 ii SurveillixTM DVR Software Manual (Version 4) Manual Edition 29597AA ­ SEPTEMBER 2009 Printed in USA No part of this documentation may be reproduced in any means, electronic or mechanical, for any purpose, except as expressed in the Software License Agreement. Toshiba shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice. THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. [. . . ] Click Program Management (ETC) and enter the Administrator password when prompted. Click Show (to the right of The agent program for DDNS). Enter the ID, Password, and Hostname specified on the DDNS document shipped with your DVR. Ensure the DVR has an IP address by setting it statically. The Network settings may need to be changed. If you are not sure of the correct values, contact the individual or department responsible for network administration at the site. Set the IP Address To set the IP address of the DVR, follow the steps below: 1. On the Display screen, click Exit and choose Restart in Windows Mode. Right-click My Network Places and click Properties. On the General tab, click Internet Protocol (TCP/IP) and then click Properties. Enter the following values (or as specified by the department responsible for network administration). IP Address: The first three sets of numbers should match the router's local IP address and the last set should be a unique number between 1-254. Subnet Mask: This should match the router's setting (commonly 255. 255. 255. 0 for 192. X addresses and 255. 0. 0. 0 for 10. X addresses). Default Gateway: This is the router's internal IP address. Once DDNS is configured, the router the DVR connects to will need to be configured to forward ports 80 and 4000 to the IP address of the DVR. For further instruction on this process, visit http://www. portforward. com/english/routers/port_forwarding/routerindex. htm Select the correct model of router, and follow the instructions. Once DDNS and port forwarding have been configured, the DVR will be accessible from any remote site by entering the HOSTNAME into the address bar of Internet Explorer or the IP Address field in the Remote Software. 29597AA 49 User Management The User Management Console allows the administrator to create, edit, and delete user accounts. Each user account can be assigned different privileges to limit the usage of the DVR system. Users can be given administrator privileges by enabling all rights, however only the true administrator account can log into the User Management Console. Enable Auto Log Off Log Off User after x Minute(s) of Inactivity* *Auto Log Off affects all users Note The Delete User button immediately deletes the user ­ use cautiously. Add a New User 1. From the Display screen, click Administrative. Select Cameras and Audio channels to hide from the user. Click OK to save changes and close the window. 50 User Rank The User Ranking structure allows the option to assign a privilege system (1-10 where one has the most rights) to users of the DVR Software. Since only one user is allowed to use the PTZ controls at any one time, an administrator with a higher rank can kick another user out and take control of the PTZ. [. . . ] Select Yes to install the POS component or select No for a basic install. The POS component is only necessary when connecting to a server running the POS Upgrade. When the Choose Destination Location window opens click Next. This will install Backup Viewer in the default destination folder. [. . . ]