User manual TOSHIBA IK-TU51CU

[. . . ] These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. USER-INSTALLER CAUTION: Your authority to operate this FCC verified equipment could be voided if you make changes or modifications not expressly approved by the party responsible for compliance to Part 15 of the FCC Rules. [. . . ] Perform the C. TEMP (color temperature conversion) setting, if necessary. (Refer to the item "7. 2 (3) WHT BAL (White balance)". ) 3200K : Appropriate for indoor shooting. 5600K : Appropriate for outdoor shooting. · If the index menu/menu is displayed, press the [DISP] button to disable the character display on the menu. · Shoot a known white object that fills the screen and push [DATA UP] button for approx. · The character AWB blinks on the screen when the AWB starts. · The character AWB stops blinking when the AWB finishes, and the result is displayed for approx. Result displayed AWB OK AWB NG LEVEL LOW AWB NG LEVEL HIGH AWB NG C. TEMP HIGH Meaning Automatic white balance adjustment finished correctly. Automatic white balance adjustment cannot be performed because the video level is too low. Automatic white balance adjustment cannot be performed because the video level is too high. OFF for variable lens conditions. 10 Page 10 2004. 04. 05, 8:51 AM 7. MODE SETTING BY ON SCREEN DISPLAY Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The contents once set are memorized when the power is turned off, so it is unnecessary to set again when using the unit next time. When the setting is performed, select the menu of the item to be set. 7. 1 Using the Menues When the power turns on, the normal screen showing only the shooting image appears. Change the output to each screen (video signal output, Index menu, and menus) by using the [DISP], [PAGE], [MENU UP], and [MENU DOWN] buttons. * A menu is selected when pushing the [PAGE] button after moving the "" on the screen by the [MENU UP], [MENU DOWN] button while the Index menu is displayed. POWER ON Video signal output DISP PAGE Index menu DISP DISP PAGE Menues PAGE SHUTTER MANU SS E. TRG RR PAGE GAIN MANU OFF PAGE WHT BAL AWB MANU PROCESS SHAD. OFF SYNC INT EXT PAGE OPTION BAUD RATE 11 Page 11 2004. 04. 05, 8:51 AM 7. 2 Menus · Select the menu to change the setting by referring the item "7. 1 Using the Menues". ) · When the [MENU UP], [MENU DOWN] buttons are pushed, the "" on the screen moves up and down. Move the "" to the item to change. [. . . ] Limited One (1) Year Warranty of Labor and Parts ISD warrants this product and parts against defects in material or workmanship for a period of one year from the date of original retail purchase by the end-user. During this period, ISD will repair or replace a defective product or part with a new or refurbished item. The user must deliver the entire product to an ISD authorized service center. The user is responsible for all transportation and insurance charges for the product to the Service Center. [. . . ]