User manual TOSHIBA IK-6550A

[. . . ] INSTRUCTION MANUAL CCD COLOR CAMERA IK-6550A Please read this manual thoroughly before use, and keep it handy for future reference. Record in space provided below the Model No. as found on the label on the bottom of this unit. Retain this information for future reference. TABLE OF CONTENTS IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FEATURES & DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Position the cursor ( ) next to CAMERA SETUP and press the SELECT switch to access the camera menu. Position the cursor ( ) next to SHUTTER and press the SELECT switch to access menu. Use the buttons to choose the shutter speed from AUTO through 1/100K. Press the SELECT switch to accept the selection. D/N MODE D/N LEVEL SHUTTER GAIN SYNC BLC SHARPNESS WB <OPTION> BACK AUTO LOW IRIS STD INT OFF MID AUTO D/N MODE D/N LEVEL SHUTTER GAIN SYNC BLC SHARPNESS WB <OPTION> BACK AUTO LOW IRIS STD INT OFF MID AUTO - 14 - 8-2-4. GAIN (AGC) Selections: OFF: AGC does not operate. STD (default): Standard position, max gain = 24dB HIGH: High-Sensitivity position, max gain = 30dB Process: 1. Position the cursor ( ) next to CAMERA SETUP and press the SELECT switch to access the camera menu. Position the cursor ( ) next to GAIN and press the SELECT switch to access menu. Use the buttons to select OFF, STD or HIGH. Press the SELECT switch to accept the selection. Note: When using in low light condition, set this selection to the HIGH position. SYNC Selections: INT (default): The camera is in the internal SYNC mode. LL: The camera is in the Line-Lock Mode. Line-Lock phase is set 0 to 300 degree by adjusting the V phase. Position the cursor ( ) next to CAMERA SETUP and press the SELECT switch to access the camera menu. Position the cursor ( ) next to SYNC and press the SELECT switch to access menu. Press the SELECT switch to accept the selection. D/N MODE D/N LEVEL SHUTTER GAIN SYNC BLC SHARPNESS WB <OPTION> BACK AUTO LOW IRIS STD INT OFF MID AUTO D/N MODE D/N LEVEL SHUTTER GAIN SYNC BLC SHARPNESS WB <OPTION> BACK AUTO LOW IRIS STD INT OFF MID AUTO - 15 - 8-2-6. BLC (BACK LIGHT COMPENSATION) Selections: When using the automatic electronic iris with an auto iris lens, the exposure adjustment is automatically performed so that the best picture is obtained at the next monitor zone. The four different BLC zones are displayed below: Process: 1. Position the cursor ( ) next to CAMERA SETUP and press the SELECT switch to access the camera menu. Position the cursor ( ) next to BLC and press the SELECT switch to access menu. Use the buttons to select BLC1, BLC2, BLC3, BLC4 or OFF (default). [. . . ] How to Obtain Warranty Service Step-by-step Procedures: To obtain warranty service. Contact Toshiba at (877) 855-1349 to first verify operation or installation assistance. If technical support determines that the unit is defective, an RMA will be issued with return instructions for repair. Securely pack the Product in the original carton and external shipping pack, include a letter explaining the problem with a copy of the bill of sale or proof of purchase. [. . . ]