User manual TOSHIBA IK-CU44A

[. . . ] INSTRUCTION MANUAL CAMERA CONTROL UNIT IK-CU44A For Customer Use Enter below the Serial No. which is located on the bottom of the cabinet. Retain this information for future reference. Model No. : IK-CU44A Serial No. : INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] To activate the SET mode by pressing the UP button, turn off the screen menu. (1. 2) White balance adjustment in MANU mode 1 Set the WB switch to "MANU" position. 2 Shoot the white object and adjust the white balance by adjusting the white balance adjust controls "R" and "B" with the screwdriver while observing the monitor or vector scope. 6. 3 FUNC LOCK Switch The FUNC LOCK switch protects settings even if a switch is accidentally pressed after setting. When the FUNC LOCK switch is ON, only the following functions are available. POWER switch (ON/OFF) FILE (A/B) in menu Settings will not be changed even if the other switches are operated. In the menu screen, all except FILE and END are displayed in black letters (white when the FUNC LOCK switch is OFF) and "FUNCTION LOCK ACTIVE" blinks to indicate that the FUNC LOCK switch is ON. FILE SHUTTER PEDESTAL SYNC AREA W B-OFFSET A AUTO 00 INT LINK:1 00 INIT. END FUNCTION LOCK ACTIVE PUSH FUNC TO SELECT 7. MODE SETTING BY ON SCREEN DISPLAY Setting while monitoring the menu on the monitor screen is possible. The following seven items can be set. 1 Scene file 2 Electronic shutter (AUTO/MANUAL), backlight correction 3 Pedestal level 4 Phase matching in external synchronization (horizontal/subcarrier synchronization) 5 White balance, auto electronic shutter, AGC measurement area 6 White balance offset 7 Scene file factory setting Press the FUNC button to display the menu. Move the cursor to a desired item by moving the cursor up or down using the UP and DOWN buttons, and set an item by pressing the FUNC button. To quit the menu, move the cursor to END and press the FUNC button. Main Menu FILE SHUTTER PEDESTAL SYNC AREA W B-OFFSET INIT. END A AUTO 00 INT LINK:1 00 UP button: FUNC The cursor position or data value goes up. PUSH FUNC TO SELECT DOWN button: The cursor position or data value goes down. FUNC button: Selects the item or data value. Notes: · When setting is changed in the menu screen, be sure to move the cursor to "END" and press the FUNC button to turn off the menu. · Don't turn off the POWER switch before turning off the menu. New setting is not stored, and old data remains. 13 7. 1 FILE (Scene File) There are two scene files A and B which can be selected according to the shooting state. FILE SHUTTER PEDESTAL SYNC AREA W B-OFFSET INIT. END A AUTO 00 INT LINK:1 00 1 Move the cursor to "FILE" in the main menu using the UP or DOWN button. 2 Press the FUNC button to display the contents to set FILE, A or B. Move the cursor to A or B using the UP or DOWN button. Press the FUNC button to set the contents. Note: · The scene file is for the menu screen. The AGC switch and the WB switch are only valid in their set positions. · The new settings are memorized when the POWER is turned off. PUSH FUNC TO SELECT FILE SHUTTER PEDESTAL SYNC AREA W B-OFFSET INIT. END A B PUSH FUNC TO SELECT 7. 2 SHUTTER (Electronic Shutter, Backlight Correction) The electronic shutter is available in AUTO (auto electronic shutter), 1/60 ~ 1/10000 and SS (synchronized scan). [. . . ] Step-by-step Procedures - How to Obtain Warranty Service [1] Verify operation of the unit by checking the instruction manual [2] If there is a defect in material or workmanship, contact an Authorized Service Provider within 30 days after the product fails to comply with specifications. [3] Arrange for delivery of the product to the ISD authorized service center. Products must be insured and securely packed, preferably in the original shipping carton. A letter explaining the defect and a copy of the bill of sale or other proof of purchase must be enclosed with a complete return street address and daytime telephone number. [. . . ]