User manual TOSHIBA IK-HR1S

[. . . ] CMOS COLOR CAMERA INSTRUCTION MANUAL IK-HR1S For Customer Use Enter below the Serial # which is located on the bottom of the cabinet. Retain this information for future reference. Model # IK-HR1S Serial # FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] The manual adjustment is most effective under shooting conditions with no color temperature variation. Adjustment is performed by confirming with a monitor. Features Measurement accuracy is Tracks variations of color temperature and adjusts white higher than ATW. This mode is effective when balance automatically. shooting under less variations of color temperature. If illumination is low, white balance may not be corrected. Notes (1) AWB(Automatic White Balance) Set the MODE to AWB on the WHT BAL menu. Perform the C. TEMP (color temperature conversion) setting, if necessary. (Refer to the item "7. 3 (3) WHT BAL (White Balance)". ) 3200K Appropriate for indoor shooting. If the color bar pattern is displayed on the screen or if the index menu/menu is displayed, press the [DISP] button to disable the color bar pattern or the character display on the menu. Shoot a known white object entirely in the area set by the AWB menu (refer to the item "7. 3 (3) (3. 1) (d) Confirming the contents of the zone area selected by AWB" ) and press [DATA UP] button for approx. The character AWB blinks on the screen when the AWB starts. The character AWB stops blinking when the AWB finishes, and the result is displayed for approx. 1 second. 10 Display AWB OK AWB NG LEVEL LOW AWB NG LEVEL HIGH AWB NG C. TEMP LOW Meaning Automatic white balance adjustment finished correctly. Automatic white balance adjustment cannot be performed because the video level is too low. Adjust the video level by increasing the illumination or opening the lens iris. Automatic white balance adjustment cannot be performed because the video level is too high. Adjust the video level by decreasing the illumination or closing the lens iris. Automatic white balance adjustment cannot be performed because the color temperature is too low. If the C. TEMP is set to 5600K, set to 3200K. If the message appears with the C. TEMP set to 3200K, change the illumination or use a color temperature conversion filter. AWB NG C. TEMP HIGH Automatic white balance adjustment cannot be performed because the color temperature is too high. If the C. TEMP is set to 3200K, set to 5600K. [. . . ] You must notify an ASP within thirty (30) days after You discover that the Product does not perform in accordance with specifications during the Limited Warranty period. All warranty servicing of this product must be made by an ISD Authorized Service Provider. You must pack the Product in its original carton using the original packing material, then insert the original carton containing the Product into another carton with additional packing material before shipping the Product to an ASP. DISCLAIMERS: ALL OTHER EXPRESS OR IMPLIED WARRANTIES ON THIS PRODUCT, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. [. . . ]