User manual TOSHIBA IK-TF9U

[. . . ] INSTRUCTION MANUAL CAMERA CONTROL UNIT IK-TF9U For Customer Use Enter below the Serial # which is located on the bottom of the cabinet. Retain this information for future reference. Model #: Serial #: IK-TF9U FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] If the message appears with the C. TEMP set to 5600K, change the illumination or use the color temperature conversion filter. Automatic white balance adjustment cannot be performed because the shutter speed mode is E. TRG mode. Automatic white balance adjustment cannot be performed for other reasons. Such as no white area is included in an object, etc. AWB NG C. TEMP HIGH AWB NG NOT AVAILABLE AWB NG 2 MANU (Manual white balance) · Set the MODE to MANU on the WHT BAL menu. (Refer to the item "7. 2 (3) WHT BAL (white balance)". ) · Shoot a known white object, adjust the white balance adjusting the levels of R GAIN and B GAIN on the menu, confirming with a monitor etc. (Refer to the item "7. 2 (3) (3. 2) Changing each setting in MANU (Manual) mode". ) 9 6. ITEMS CONTROLLED BY USING ON SCREEN DISPLAY Item MODE E. Partial read 25fps Partial read 30fps Partial read 35fps Partial read 40fps Partial read 45fps Partial read 50fps Partial read Trigger (1P SNR/SR) Trigger (PW SNR/SR) 1P exposure time MODE MANU MODE Color temperature MANUAL R GAIN MANUAL B GAIN GAMMA Master pedestal R pedestal B pedestal Shading correction mode Manual shading correction H phase adjustment Baud rate Available selections MANU, SS, E. TRG 1P SNR, 1P SR, PW SNR, PW SR OFF, 1/100s, 1/250s, 1/500s, 1/1000s, 1/2000s, 1/4000s, 1/10000s, 1/25000s, 1/50000s, 1/1000000s 2H/1592H~1590H/1592H, OFF, 2FRM~512FRM 2H/1270H~1268H/1270H, OFF, 2FRM~512FRM 2H/1060H~1058H/1060H, OFF, 2FRM~512FRM 2H/910H~908H/910H, OFF, 2FRM~512FRM 2H/774H~772H/774H, OFF, 2FRM~512FRM 2H/706H~704H/706H, OFF, 2FRM~512FRM 2H/636H~634H/636H, OFF, 2FRM~512FRM OFF, 25fps, 30fps, 35fps, 40fps, 45fps, 50fps, E25fps, E30fps, E35fps, E40fps, E45fps, E50fps , , 0. 01ms~50ms MANU, OFF 0dB~18dB AWB, MANU 3200K, 5600K -100~0~100 -100~0~100 ON, OFF -64~0~64 -64~0~64 -64~0~64 MANU, OFF -128~0~127 -100~0~100 9600 bps, 19200 bps 50 ms OFF 0dB AWB 3200K 0 0 OFF 0 0 0 MANU 0 0 9600 bps Preset value (Factory setting) MANU 1P SNR OFF OFF 10 Electronic shutter Gain White balance OFF Process Sync Option 7. MODE SETTING BY ON SCREEN DISPLAY Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The contents once set are memorized even if the power source is turned off, so it is unnecessary to set again when using the unit next time. When the setting is performed, select the menu of the item to be set. 7. 1 Using the Menus When the power is turned on, the normal screen showing only the video signal appears. Change the output to each screen (video signal output, Index menu, and menus) by using the [DISP], [PAGE], [MENU UP], and [MENU DOWN] buttons. * A menu is selected when pushing the [PAGE] button after moving the "" on the screen by the [MENU UP], [MENU DOWN] button while the Index menu is displayed. POWER ON Video signal output DISP PAGE Index menu DISP DISP PAGE Menues PAGE SHUTTER MANU SS E. TRG RR PAGE GAIN MANU OFF PAGE WHT BAL AWB MANU PROCESS SHAD. OFF SYNC INT EXT PAGE OPTION BAUD RATE 11 7. 2 Menus · Select the menu to change the setting by referring the item "7. 1 Using the Menus". ) · When the [MENU UP], [MENU DOWN] buttons are pushed, the "" on the screen moves up and down. Move the "" to the item to change. Note: When performing the mode setting in the menu display while selecting ON in "PART" (refer to page 29) and E. TRG in "MODE", the display shows normal mode and then the camera returns the setting mode. ( 1 ) SHUTTER (Electronic shutter) The electronic shutter has three modes; MANU (Manual), SS (Synchro. Set the "" to "MODE" and push [DATA UP], [DATA DOWN] button to select the desired mode among "MANU", "SS", "E. TRG". [. . . ] You must notify an ASP within thirty (30) days after You discover that the Product does not perform in accordance with specifications during the Limited Warranty period. All warranty servicing of this product must be made by an ISD Authorized Service Provider. You must pack the Product in its original carton using the original packing material, then insert the original carton containing the Product into another carton with additional packing material before shipping the Product to an ASP. DISCLAIMERS: ALL OTHER EXPRESS OR IMPLIED WARRANTIES ON THIS PRODUCT, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. [. . . ]