User manual TOSHIBA IK-UM44H

[. . . ] 1 36 [1. 42] Ø [0 11 . 4 . 5 53 ] 6. 6 7. 6 [0. 26] [0. 30] FOCUS LOCK 19. 9 [0. 783] Ø 12 [0. 472] CONNECTION 2. 6 [0. 10] 9 (in air 7. 2) [0. 354] [0. 283] 6 [0. 236] 11. 6 [0. 457] 24. 6 [0. 97] 4 [0. 157] 2- Ø 3 hloe [0. 118] 30 [1. 18] 14 [0. 55] IK-CU44A (option) Camera control unit VIDEO G Lens (option) Camera head CAMERA DC IN 12V When connecting or disconnecting the camera cables (for the camera head and camera control unit), always turn off the power switch of the camera control unit first. If not, the camera head may be damaged. CCD image plane 20 [0. 787] Tri-pot screw (1/4-20UNC) Camera cable (option) DC Supply (12V) LIMITED WARRANTY TOSHIBA CCD CAMERA Promptly register your product with Toshiba on-line at www. toshiba. com/taisisd. By registering your product you will be eligible for periodic updates, announcements, and special offers. You will have access to extended warranty options, upgrades (as applicable), useful tips, on-line troubleshooting, and the ability to schedule service on-line if necessary. [. . . ] Notwithstanding the foregoing, Toshiba's liabilities shall not, in any circumstances, exceed the purchase price of the product. COPYRIGHT AND RIGHT OF PORTRAIT There may be a conflict with the Copyright Law and other laws when a customer uses, displays, distributes, or exhibits an image picked up by a television camera without permission from the copyright holder. Please also note that transfer of an image or file covered by copyright is restricted to use within the scope permitted by the Copyright Law. CAUTIONS ON USE AND INSTALLATION Carefully handle the units. Do not drop, or give a strong shock or vibration to the camera. Treat the camera cables carefully to prevent cable problems, such as cable breakdown and loosened connections. If there is an intense light at a location on the screen such as a spot light, a blooming and smearing may occur. When intense light enters, vertical stripes may appear on the screen. Ghosts may occur when there is an intense light near the object. In this case, change the shooting angle. Install the camera in a location free from noise. If the camera or the cables are located near power utility lines or a TV, etc. undesirable noise may appear on the screen. In such a case, try to change the location of the camera or the cable wiring. Moire When thin stripe patterns are shot, stripe patterns that are not actually there (moire) may appears as interference stripes. Operating ambient temperature and humidity. Do not use the camera in places where temperature and humidity exceed the specifications. Picture quality will lower and internal parts may be damaged. Be particularly careful when using in places exposed to direct sunlight. When shooting in hot places, depending on the conditions of the object and the camera (for example when the gain is increased), noise in the form of vertical strips or white dots may occur. Keep the protection cap away from children. Children may put them into mouth or swallow them accidentally. The protection cap protects the image sensing plane when the lens is removed from the camera, do not throw away. When not using the camera for a longtime. [. . . ] Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation may not apply. No person, agent, distributor, dealer, service station or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within which an action must be commenced to enforce any obligation of ISD arising under this warranty or under any statute, or law of the United States or any state thereof, is hereby limited to one year from the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising under state law. [. . . ]