User manual TOSHIBA IK-VR01A

[. . . ] INSTRUCTION MANUAL CCD COLOR CAMERA IK-VR01A Please read this manual thoroughly before use, and keep it handy for future reference. Record in space provided below the Model No. as found on the label on the bottom of this unit. Retain this information for future reference. TABLE OF CONTENTS Important safeguards 1. Features & Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. USER-INSTALLER CAUTION : Your authority to operate this FCC verified equipment could be voided if you make changes or modifications not expressly approved by the party. Serial No Label The serial No. FEATURES & DESCRIPTION IK-VR01A has the following features: (1) Flush/Surface mount. (2) IP66 Standard for dust and water resistance. (3) Built in vari-focal lens with auto-iris Focal length 3. 0~8. 0mm. (4) Incorporated 1/3" type CCD image sensor gives high resolution and excellent sensitivity 480 lines horizontal resolution 0. 4 lx minimum illumination with tint dome cover (5) 50dB Signal-To Noise Ratio (6) Power supply- AC24V or DC12V - This camera automatically detects the power. (7) BLC, AGC, and Line-Lock (AC24V) 2. CAUTIONS (1) Avoid touching the lens glass with your fingers. If necessary, use a soft cloth moistened with alcohol to wipe off any dust. (3) Avoid shooting the camera at intense light. Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. (4) Install the camera away from video noise. If cables are wired near electric lighting wires or a TV set, noise may appear in images. In this event, relocate cables or reinstall equipment. 3. COMPONENTS (1) Camera (with Tint Dome Cover installed) (2) Accessories (a) Mounting Base (b) Bracket (c) Screw A (d) Screw B (e) Clear Dome Cover (f) Special Hexangular Wrench (g) Monitor Out Harness Wire (h) Power Connector (i) Instruction Manual 1 pc. PART NAMES & FUNCTIONS Mode Setting Switch LL BLC ON OFF Lens Iris ADJ Counterclockwise: The picture becomes darker. Clockwise: The picture becomes brighter. "Optimum Value" is at default setting. BLC (Backlight Compensation Switch) With the switch on, it adjusts the backlight automatically to obtain the best possible image. LL Sets camera synchronization to line lock with the switch on. [. . . ] · Never touch internal parts Do not touch the internal parts of the camera other than the parts specified. · Do not splash water on the camera Install the camera where the camera can be kept dry. If the camera gets wet, turn off the power and contact your dealer. · Check the ambient temperature and humidity Avoid using the camera where the temperature is hotter or colder than specified. [. . . ]