User manual TOSHIBA IK-WB30A

[. . . ] NETWORK CAMERA Model: IK-WB30A User's Manual For information on our latest products and peripheral devices, refer to the following Website: http://www. toshibasecurity. com If the URL changes, refer to the Toshiba website (http://www. toshiba. com/ tai/products/prod_biz. jsp). Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Important Safeguards (Cont. ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Notes on Use and Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For example: 58 Network: This rule allows the user to assign a network address and corresponding subnet mask to the Allow/Deny List. For example: IP address 192. 168. 2. x will be bolcked. Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List. For example: Delete Allowed/Denied list: In the Delete Allowed List or Delete Denied List column, make a selection and click Delete. NOTE For example, when the range of IP addresses on the allowed list is set from 1. 1. 1. 0 to 192. 255. 255. 255 and the range in the denied list is set from 1. 1. 1. 0 to 170. 255. 255. 255, only users' IPs between 171. 0. 0. 0 and 192. 255. 255. 255 can access the Network Camera. Allowed List Denied List Administrator IP address Always allow the IP address to access this device: You can check this item and add the Administrator's IP address in this field to make sure the Administrator can always connect to the device. 59 Audio and Video This section explains how to configure the audio and video settings of the Network Camera. It is composed of the following two columns: Video Settings and Audio Settings. Video Settings Video title: Enter a name that will be displayed on the title bar of the live video. Video Title Title and Time Video 17:08:56 2010/01/15 2010/01/15 17:08:56 Color: Select to display color or black/white video streams. Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image flickering associated with fluorescent lights. Note that after the power line frequency is changed, you must disconnect and reconnect the power cord of the Network Camera in order for the new setting to take effect. Iris mode: Select a proper iris mode for your environment. Fixed: Mode for manual iris lens. Exposure time will be controlled automatically for all use. (If connected Auto Iris Lens, lens iris will be opened automatically. ) Indoor: Mode for DC Auto Iris lens. Lens iris and exposure time will be controlled automatically for indoor use. Lens iris and exposure time will be controlled automatically for outdoor use. Select caching stream: This Network Camera supports time shift cache stream on the Network Camera. Select one stream and check the below option Enable time shift caching stream. 60 Enable time shift caching stream Advanced Mode : Check this item to enable the time shift cache stream on the Network Camera, which will stores video in the camera's embedded memory for a period of time depending on the cache memory of each Network Camera. Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling) to correct the image orientation. Overlay title and time stamp on video: Select this option to place the video title and time on the video streams. The time refers to System Time on page 33. Note that when the frame size is set to 176 x 144 as shown in the picture below, only the time will be stamped on the video streams. 2010/01/15 17:08:56 17:08:56 2010/01/15 Options of Video Advanced Mode There are three options for you to choose: Video Quality first, Video frame rate first, and Cropping mode. Select either one mode according to your needs. Video quality first: Select this option will reduce the maximum frame rate to 15fps and clear the settings in the Viewing Window. Video frame rate first: Select this option will limit the frame size to 800x600 and clear the settings in the Viewing Windows. [. . . ] If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. [. . . ]