User manual TOSHIBA IK-WB80A

[. . . ] NETWORK CAMERA Model: IK-WB80A User's Manual For information on our latest products and peripheral devices, refer to the following Website: http://www. toshibasecurity. com If the URL changes, refer to the Toshiba website (http://www. toshiba. com/). Table of Contents Introduction 4 ImportantSafeguards 6 NotesonUseandInstallation 9 PrecautionsforUse 10 ACAdapter 11 PackageContents 13 PhysicalDescription 14 Installation 18 Hardware Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Network Deployment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Ready to Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Exposure time will be controlled automatically for all use. Indoor: Lens iris and exposure time will be controlled automatically for indoor use. Outdoor: Lens iris and exposure time will be controlled automatically for outdoor use. Select caching stream: This Network Camera supports time shift cache stream on the Network Camera. Select one stream and check the below option Enable time shift caching stream. 61 Enable time shift caching stream Advanced Mode : Check this item to enable the time shift cache stream on the Network Camera, which stores video in the camera's embedded memory for a period of time depending on the cache memory of each Network Camera. Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling) to correct the image orientation. Overlay title and time stamp on video: Select this option to place the video title and time on the video streams. The time refers to System Time on page 34. Note that when the frame size is set to 176 x 144 as shown in the picture below, only the time will be stamped on the video streams. 2010/01/15 17:08:56 17:08:56 2010/01/15 Options of Video Advanced Mode There are three options for you to choose: Video Quality first, Video frame rate first, and Cropping mode. Select either one mode according to your needs. Video quality first: Select this option will reduce the maximum frame rate to 15fps and clear the settings in the Viewing Window. Video frame rate first: Select this option will limit the frame size to 800x600 and clear the settings in the Viewing Windows. Cropping mode: The cropping function allows users to crop unnecessary information and simply transmit the image of the target region for viewing or storage. With the trimming, the transmitting data size and thus, the network load is reduced and a higher frame rate is obtained. As a result, bandwidth resources and storage space can be used more efficiently. Image Settings Advanced Mode Click Image settings to open the Image Settings page. On this page, you can tune the White balance, Brightness, Saturation, Contrast, and Sharpness settings for the video. 62 2010/01/15 02:27:43 White balance: Adjust the value for the best color temperature. Auto The Network Camera automatically adjusts the color temperature of the light in response to different light sources. The white balance setting defaults to Auto and works well in most situations. Keep current value Follow the steps below to manually set the white balance to compensate for the ambient lighting conditions. Set the White balance to Auto and click Save. [. . . ] If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. [. . . ]