User manual TOSHIBA IK-WR01A

[. . . ] NETWORK CAMERA Model: IK-WR01A Operation Manual To get started, read the separate "Safety Precautions" carefully. For information on the latest products and peripheral devices, refer to the following Web page. Ihttp://www. netcam. toshiba. com The above URL is subject to change without prior notice. If the URL changes, refer to the Toshiba website (http://www. cctv. toshiba. com). This User's Guide applies to the firmware version R1. 01 and later. WR01-01 Important Safety Instructions Be sure to read "IMPORTANT SAFEGUARDS" in the separate "Safety Precautions. " Installation/Set up Viewing and Operation Recording Setting up Others 2 INTRODUCTION FEATURES & DESCRIPTION IK-WR01A has the following features: (1) Flush/Surface mount. [. . . ] If you do not know the directory, ask for your FTP server administrator. 6) Click "Save Settings" button to save configured items G The changes are discarded. Others 7) Configure settings for viewing FTP status G Select the interval in "Check FTP status (sec)" from the pull-down menu to try to view the FTP status. 8) Click "Save Settings" button to save configured items G The changes are discarded. 49 Recording Images on FTP Server (Cont. ) File Transfer Order · Basically, files are transferred in recorded order. However, files may not be transferred depending on the conditions of networking or FTP server. (The camera will not backup data. ) Installation/Set up Viewing and Operation Recording Setting up Others NOTE · Depending on the conditions of networking and the FTP server, there may be occasions when files will not transfer. 50 Recording Images on a Personal Computer You can record images in the JPEG file or AVI file format on a personal computer. Installation/Set up Image Recording Feature Right-click on the image of the "Camera Window" screen. G The operating menu appears on the screen. Viewing and Operation Click "Image Recording. " G The image recording setting screen appears. Setting up Recording. Recording When saving images as a JPEG file Mark here to save images as a JPEG file. Enter the saving interval. Setting up Click the "Save As" button ¡ Select the destination directory. Enter the file name without the extension. Specify the recording limit. Mark one of the items and enter the value in its field. Others When saving images as an AVI file 51 Recording Images on a Personal Computer (Cont. ) Installation/Set up Viewing and Operation Recording Mark here to save images as an AVI file. Mark "Auto" or enter the frame rate value in the Frame Rate. Enter the maximum number of frames recorded in one file. Click the "Save As" button ¡ Select the destination directory. Enter the file name without the extension. Mark one of the items and enter the value in its field. Click the "Start" button. G The recording operation starts. Setting up Others To stop the recording, right-click on the image ¡ Click "Stop Image Recording" in the displayed operating menu. 52 Recording Current Image Data as Still Image Right-click on the image of the "Camera Window" screen. G Installation/Set up The operating menu appears on the screen. Viewing and Operation Click "Save Current Picture As. " G A screen appears, asking you to specify the destination folder and file name. Specify the destination folder and file name. Recording G G You can save the data in any place and under any file name you like. The still image taken at the moment when clicking "Save Current Picture As" is saved. Setting up Others 53 Installation/Set up Viewing and Operation Recording Setting up Others 54 Setting up G How to Set up G System Settings G User Settings G Admin Settings G Alarm Settings G Network Settings G Mail Settings G FTP Client Settings G DDNS Settings G Updating the Firmware G Saving the Settings on a Personal Computer How to Set up Only the Administrator is authorized to set up configurations for the network camera. You can select the setup items by clicking "Configuration" on the "Camera Window" screen. Installation/Set up Viewing and Operation Recording Setting up Others General Configuration Click "Configuration" on the left side of the "Camera Window" screen. · The Configuration menu appears on the left side of the screen. · When you do not log in as Administrator, the "Configuration" menu does not appear. Perform the operation through the Administrator login. Click an item you want to configure in the Configuration menu on the left side of the screen. · The setup screen for the clicked item appears on the right side of the display. Configure each item. · To update the settings, click the "Change" button, the "Save" button, the "Save Settings" button or the "Set" button etc. · To return to the image screen after configuration, click "Camera Window" on the left side of the screen. · On the screen in which "go to XX (name of setup item)" is displayed (e. g. "go to Mail Settings"), click it to display the setup screen for the item. 56 System Settings You can change a camera name and control time set. Installation/Set up Click "Configuration" on the left side of the "Camera Window" screen. · The Configuration menu appears on the left side of the screen. Click "System" on the left side of the screen. · The System setting screen appears on the right side of the display. Viewing and Operation Recording Setting up Configure each item. GChanging the camera name 1) Enter the camera name in the "Camera Name" field (default: wrcam01) (no more than 18 characters). · The camera name is displayed in association with the images on the camera. Others 57 System Settings (Cont. ) GSetting up a format to display date/time 1) Select the "Date-Time Displaying Format" from the pull-down menu. 2004-9-15 14:23:32) · dd Mmm yyyy HH:MM:SS (ex. 15 Sep 2004 14:23:32) · mm-dd-yyyy HH:MM:SS (ex. 9-15-2004 14:23:32) (default: dd Mmm yyyy HH:MM:SS) 2) Click the "Change" button. Installation/Set up Viewing and Operation Recording Setting up Others GSetting the color of date/time display 1) Select "Text Color" from the pull-down menu. red/green/blue/white/black (default: green) 2) Click the "Change" button. GChanging the time using an NTP server setting 1) Mark "NTP" (default: not marked). 2) Enter the host name of NTP server in the "NTP Server" field. [. . . ] GNTP server setting may not be right. Recording GThe NTP server released on the Internet may become invalid without notifying users. GCouldn't complete the GRetry updating firmware by following steps of updating because of "Updating the Firmware" on page 72. network trouble, the power has cut off or other reasons. Setting up Others 87 Before Calling Service Personnel. . . (Cont. ) Symptom Cause How to Manage Installation/Set up Viewing and Operation Recording Setting up Others Recorded images are not saved in FTP server. GFTP recording function is GCheck the FTP recording function whether it is set to not set to ON. (¡ page 45) GIP address of the FTP server, ID/ password or transfer directory is not set properly. [. . . ]