User manual TOSHIBA KV-9168A

[. . . ] PAUSE/STILL POWER TIME LAPSE VCR 4Head 168Hour PLAY STOP REV FWD TAPE REMAIN DISPLAY ­ TIME MODE SET + TRACKING HIGH DENSITY MEMORY COUNTER ALARM RESET SHIFT LOCATION SELECT NOTICE NOTICE 44 PLAYBACK OPERATION 39 OPERATION RECORDING OPERATION 23 OPERATION VIRTUAL REAL-TIME & TIME LAPSE VCR KV-9168A PREPARATION PREPARATION 11 Instruction Manual INTRODUCTION INTRODUCTION 4 PLEASE READ INTRODUCTION WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: PREPARATION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. [. . . ] Press the or SHIFT button to blink ALARM and press the + or ­ SET button to go to ON. DISPLAY ­ TIME MODE SET SHIFT TRACKING LOCATION SELECT + Displaying the hour display. Press the or SHIFT button to blink (12H/24H) and press the + or ­ SET button to go to 12H. TIME MODE SET SHIFT TRACKING LOCATION SELECT DISPLAY ­ + Changes between 12H and 24H each time the + or ­ SET button is pressed. DISPLAY (DATE) ON (DAY OF THE WEEK) ON (TIME) ON (SPEED) ON (VCR) OFF (ALARM) ON (12H/24H) 12H (CHAR. LINES) 6 MENU=[DISPLAY] 8/28/97 THU 5:30:02PMSPA 2 This function enables to indicate and record information from cash register or ATM using a specified option box. Press the or SHIFT button to blink CHAR. LINES and the + or ­ button to go to "6". Press the + or ­ button to select the characters of line number. Each time pressing the + or ­ SET button, the display changes as follows. If you select [DATE] ON: 612345 [TIME] ON: [DATE] OFF: 67812345 [TIME] OFF: } } DISPLAY (DATE) ON (DAY OF THE WEEK) ON (TIME) ON (SPEED) ON (VCR) OFF (ALARM) ON (12H/24H) 12H (CHAR. LINES) 6 MENU=[DISPLAY] 8/28/97 THU 17:30:32SP A 2 1 LINE 2 LINE 3 LINE 4 LINE 5 LINE 6 LINE 18 NOTICE PLAYBACK OPERATION RECORDING OPERATION Changes between OFF and ON each time the + or ­ SET button is pressed. When an alarm is input, the day of the week display changes to the alarm number. DISPLAY (DATE) ON (DAY OF THE WEEK) ON (TIME) ON (SPEED) ON (VCR) OFF (ALARM) ON (12H/24H) 24H (CHAR. LINES) 6 MENU=[DISPLAY] Alarm number 8/28/97 A01 17:30:13 SPA 2 PREPARATION Changes as shown below each time the SET button is pressed. OFF V01 V02 V03 V04 V05 V06 V07 V08 OFF DISPLAY (DATE) ON (DAY OF THE WEEK) ON (TIME) ON (SPEED) ON (VCR) V01 (ALARM) ON (12H/24H) 24H (CHAR. LINES) 6 MENU=[DISPLAY] INTRODUCTION INTRODUCTION COUNTER DISPLAYS Counter Memory When the counter is set to "0000" at a location that you want to see again during recording and playback, the tape will stop in the vicinity of "0000" during rewind and fast forward. PREPARATION 1 When the alarm counter is displayed, press the ALARM button to set the display to the counter display. ALARM REC SP H 3 Press the COUNTER MEMORY button to make "COUNT. M" (Counter Memory) to light. COUNT. M H SP REC COUNTER MEMORY ALARM RESET MEMORY COUNTER ALARM RESET 2 RECORDING OPERATION Press the RESET button at the location you want to see. H 4 REV Turn the SHUTTLE dial to set rewind or fast forward after STOP button is pressed. COUNT. M SP H REC SP COUNTER FWD MEMORY ALARM RESET Alarm Memory When you want to view the location where alarm recording was performed. 1 PLAYBACK OPERATION Press the STOP button. ALARM REC SP H 3 REV Turn the SHUTTLE dial to set rewind or fast forward. ALARM M ALARM SP H PLAY PLAY STOP FWD When the tape reaches the alarm recorded position, The VCR automatically enters the still picture mode. 2 NOTICE Press the COUNTER MEMORY button twice to make "ALARM. M" to light. ALARM M ALARM SP H 4 Press the PLAY button. COUNTER MEMORY ALARM RESET PLAY STOP 19 Notes: In the cases shown below, Alarm Memory search may be not carried out. i If the alarm recording is not carried out for more than those listed in the following chart then, the alarm may be skipped. i If the alarm recording interval is not left for more than those listed in the following chart then, the alarm may be skipped. i If there is not enough time between the beginning of the alarm search and the first alarm activation. If the time period is shorter than those listed in the following chart then, the first alarm may be skipped. Record mode SPA2 or EPA6 SPA12 EPA18 SPA24 Minimum alarm recording Minimum alarm recording time needed interval needed 2s 15 s 7s 30 s 7s 50 s 25 s 95 s Minimum recording time needed between start of search and first alarm activations 5s 15 s 65 s Tape Remain When the TAPE REMAIN button is depressed during recording or playback, the counter display changes to the remaining tape display. The remaining time is the approximately estimated time in the SPA2 mode to tape end. H REC TAPE REMAIN SP · The remaining time is the approximate remaining time. · Displays the remaining tape time estimated in the SPA2 mode. During computation of the remaining time, the following display appears. H REC SP · When the VCR has been used in the recording mode over a long period, it may take considerable time for computation. When operating at fast speed in the SPA2 mode, the computation is faster. Note: PLAYBACK OPERATION It is possible to compute the remaining time for T-120, T-90, T-60 and T-30 tape. The display will not be correct for other kinds of tape. Error Message When an abnormality occurs during operation, the error code is displayed. At the same time, the buzzer will sound continuously. H SP Code Number E-1 E-3 Condition of Abnormality Abnormality on reel rotation during tape running. [. . . ] You must provide the bill of sale or proof of purchase at the time that warranty service is required. You must notify an ASP within thirty (30) days after You discover that the Product does not perform in accordance with specifications during the Limited Warranty period. You must pack the Product in its original carton using the original packing material, then insert the original carton containing the Product into another carton with additional packing material before shipping the Product to an ASP. DISCLAIMERS: ALL OTHER EXPRESS OR IMPLIED WARRANTIES ON THIS PRODUCT, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. [. . . ]