User manual TOSHIBA M64

[. . . ] Dangerous high voltages are present inside the enclosure. Refer servicing to qualified personnel only. CAUTION: This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owner's manual carefully and retain for future reference. [. . . ] 3) Press DISPLAY a third time for the elapsed time display of the played tracks. 4) Press DISPLAY a fourth time for the remaining time display of the disc. 5) To turn off the display, press DISPLAY again. Track Repeat Off Elapsed time of the current track VCD 2. 0 TR K Track PB C X Repeat Off Remaining time of the current track VCD 2. 0 TR K Track PB C X Repeat Off Elapsed time of the played track 15 . VCD 2. 0 TR K Track PB C X Repeat Off Remaining time of the current disc The function is the same as the HDMI SELECT on the front panel. USB button Select the USB mode during DVD stop. VCD 2. 0 TR K PB C X 40 Note "PBC" display will change from light green to black when PBC is set to Off. 13 Connections Connecting to a TV Connect the DVD player to your TV. Connecting to a TV (Using the SCART socket) VIDEO L Normal TV HDMI OUT COAXIAL DIGITAL ANALOG R To AV · Make the following setting. On-screen display Select: RGB HDMI Page 24 SCART cable (not supplied) "Video" Connecting to a TV (Using the phono type jacks) VIDEO L Normal TV HDMI OUT COAXIAL DIGITAL ANALOG R T VIDEO o OUT (yellow) T audio o input T video o input (yellow) T 2ch AUDIO OUT o (R: red, L:white) · Make the following setting. Audio/Video cables (not supplied) On-screen display "Digital out" Select: "Off", "PCM" or "Bitstream" RGB HDMI Page 24 "Video" 24 Notes · Refer to the owner's manual of the connected TV as well. · When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. · If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not supplied) and then connect to your TV. · Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the playback picture may be distorted as DVDs are copy protected. · Analogue audio out will not have sound if DTS playback is selected. 14 About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays. HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surroundsound audio. HDMI features included uncompressed digital video, a bandwidth of up to 2. 2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs. · Refer to the owner's manual of the connected equipment as well. · When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. · The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. · Turn off the amplifier before you connect or disconnect the DVD player's power cord. If you leave the amplifier power on, the speakers may be damaged. 16 Connecting to Optional Equipment (continued) Connecting to an amplifier equipped with a Dolby® Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can Manufactured under license from Dolby Laboratories. Dolby and the enjoy motion picture and live concert DVDs with this dynamic realistic sound by double-D symbol are trademarks of connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital Dolby Laboratories. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide · Use DVDs encoded via the Dolby full 5. 1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Digital recording system. · Make the following setting. On-screen display Amplifier equipped with a Dolby Digital decoder VIDEO Connections Select: "PCM" or "Bitstream" Page 24 L COAXIAL DIGITAL ANALOG R "Digital out" T COAXIAL o type digital audio input T wall o outlet T COAXIAL o DIGIT AL AUDIO OUT 75 coaxial cable (not supplied) Connecting to an amplifier equipped with Dolby Surround Pro Logic Dolby Surround Pro Logic You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting · Make the following setting. [. . . ] (Check the disc type and color system. ) · Place the disc with the playback side down. · Place the disc correctly inside the guide on the disc tray. · Cancel the parental lock function or change the parental lock level. · These operations may prevent a proper progress of the contents. [. . . ]